Only about 1/4 of them did this

      • Cheesus@lemmy.world
        link
        fedilink
        arrow-up
        36
        arrow-down
        1
        ·
        edit-2
        1 year ago

        Usually cookies need baking soda, not baking powder. If they call for both, it’s at least 2x baking soda. People mix it up and add baking powder instead of soda.

        Or if the cookie requires levening from the powder and it’s expired, it will not rise and spread.

        Soda helps with browning and powder is for levening

        • slackassassin@sh.itjust.works
          link
          fedilink
          arrow-up
          4
          ·
          edit-2
          1 year ago

          This is right about the mix-up, etc. But, they are both levening agents. Powder includes an acidic reactor, and soda requires one to be included separately. Using both is a way to fine tune the reaction.

          • Cheesus@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            You’re right they’re both levening agents but my understanding was in cookies soda is used for browning and not levening because there is no acid for it to react with.

            • slackassassin@sh.itjust.works
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              Yes! It does help with browning, too. But there is lactic acid in the butter. You’ll notice a flatter cookie without soda. I like those sometimes too, flat buttery crispy bois.

      • subignition@kbin.social
        link
        fedilink
        arrow-up
        17
        ·
        1 year ago

        did you try reading the article?

        If you’re sure you used butter at the correct temperature, you may have accidentally ‘warmed’ your butter by mixing it with an electric mixer for too long.

        Many cookie recipes start by creaming together the butter and sugar – this is just to combine the ingredients.

        If you do this for too long, your room temperature butter will get super warm – and then you’ll face problem 1. all over again.

      • enthusiasticamoeba@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Some recipes depend on the dough being mixed just until the ingredients are combined, and not any longer. Other commenters are saying that overmixing cookies can warm the butter too much. With some recipes, like muffins, mixing creates gluten chains that lead to chewey-ness and toughness. So in order to avoid that you stop mixing asap.

        Baking is a chemical reaction and the quantities, order, and methods really do have a huge impact on the result!

  • mwproductions@lemmy.world
    link
    fedilink
    arrow-up
    34
    ·
    1 year ago

    Best guess just by looking at the photo is too much butter and I’m guessing you didn’t chill the dough before you baked them.

    • Uncaged_Jay@lemmy.worldOP
      link
      fedilink
      arrow-up
      16
      arrow-down
      1
      ·
      1 year ago

      I didn’t chill the dough, though the recipe didn’t tell me to and my wife said I didn’t need to, so I’m thinking I over mixed it

      • Annoyed_🦀 @monyet.cc
        link
        fedilink
        arrow-up
        13
        ·
        1 year ago

        It’s not a requirement i think, but it will shape up well and easier. You mentioned that only 1/4 did this, maybe it’s due to uneven mixing? Did you use mixer for it or did you mix by hand? Maybe the butter isn’t soft enough so it didn’t mix well?

        • Uncaged_Jay@lemmy.worldOP
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          I have one of those KitchenAid mixers, that’s what I used. I’m wondering if the butter didn’t melt after the fact while it was sitting in the bowl since these were the last ones that I made

          • minorninth@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            1 year ago

            Did you scrape the bowl while mixing?

            KitchenAid mixers are great, but depending on what you’re mixing you need to scrape the sides of the bowl with a spatula and then mix some more.

            I don’t think it’s over mixed, I think the cookies made from the batter that was stuck to the sides are under mixed.

            • Uncaged_Jay@lemmy.worldOP
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              I think you might be right. Honestly, the number of different responses indicates it could’ve been pretty much everything

            • minorninth@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              Also, did you fully cream the butter and sugar before adding any other ingredients?

              If you just dump everything into the bowl and then mix, this is what happens

          • Annoyed_🦀 @monyet.cc
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            What the other user said, maybe it’s just uneven-mixed batch from the side of the bowl. But if everything doesn’t checks out, then i’m out of idea 😅

      • TheActualDevil@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I think it’s maybe a little but of both of what you and Annoyed_[Crabemoji] said. From what I remember of baking, butter being not chilled enough will cause it to be too soft and cook out before the chemistry can happen and they deflate like that. But obviously, it’s real tough to mix in chilled solid butter, so by the time you’ve needed it enough for it to incorporate, it’s warm again. When I was in culinary school back in the day we’d bake in huge batches, obviously, so we’d use big ole mixers to combine the cold butter quickly with giant mechanical paddles that forced it to combine while still cold. But at home, if you have to mix by hand and you know that the butter isn’t cold anymore you can definitely chill the cough before baking. I don’t remember much from those days (I was never a baker, I was a line cook, but baking classes were required), but when I saw your picture my immediate thought from the dredges of 20 year old memories was “That butter wasn’t chilled.”

        • Coreidan@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          Been baking cookies for years. You definitely do not need to chill any of your ingredients. If you need to do that then you already screwed up with your ingredient ratios.

  • AnalogyAddict@lemmy.world
    link
    fedilink
    arrow-up
    31
    ·
    1 year ago

    Everyone is telling you too much butter, but if this only happened to part of your batch, it’s more likely you didn’t scrape the sides of your bowl while mixing.

    When mixing anything with creamed butter, especially, you need to mix about a third of the time, scrape all the sides and fold the dough, mix, scrape, mix, and do a final scrape/ mix/ fold by hand to make sure all the butter is incorporated.

    Stand mixers have this problem more than hand mixers.

    • Yamainwitch@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      This is the right answer, when using a stand mixer you want to keep the speed level low (after creaming the butter/sugar/milk) and scraping the sides down to ensure an even distribution of wets/drys. Chilling can help with maintaining a shape, but it’s by no means mandatory. How did they taste? 😁

  • CeruleanRuin@lemmings.world
    link
    fedilink
    English
    arrow-up
    17
    ·
    1 year ago

    If this isn’t consistent across the batch, then I’d say you didn’t mix the dough very well. Some of the gobs got a lot of extra butter.

    • Uncaged_Jay@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Most of them were fine, these were more like pralines or lace cookies though, and they are delicious like this

  • unalivejoy@lemm.ee
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    It’s possible you didn’t beat them enough, so there were large pockets of sugar, powder, flour, etc.

    • rtfm_modular@lemmy.world
      link
      fedilink
      arrow-up
      7
      ·
      edit-2
      1 year ago

      This is what I thought as well. Creaming butter and sugar properly gives the cookie better structure and spread less.

      The butter also needs to be the right temperature before baking—chilling dough is sometimes needed. Also regularly scrapping the sides of the bowl while mixing is important to have a nice homogeneous cookie without gobs of dry flour or butter.

  • Soulfulginger@lemmy.world
    link
    fedilink
    arrow-up
    9
    ·
    1 year ago

    Did you use melted or soft butter? Did you refrigerate the dough before baking?

    We would need to know more about the recipe and what you did while baking to know for sure

  • Coreidan@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    2
    ·
    1 year ago

    Yup, that’s what happens when you make your cookies all different sizes and don’t properly space them out.