They are already tagged as explicit/clean in the metadata as well as separated by folder with an [E] tag if explicit. I could manually rematch them but my library is large so I’d really rather not

I like Plexamp but there’s a couple of things to be aware of depending on your music library that took me a while to figure out:

• They downsample anything above 48kHz which isn’t a big deal but sucks if you have hi-res music. It won’t even tell you it’s transcoding if you check the dashboard and Plexamp will show it as playing at the actual sample rate which is misleading when trying to debug.
• It doesn’t distinguish between explicit and clean versions so if you have both then it will just look like duplicates. You also can’t favorite just the clean or explicit version as favoriting one will do the same for both versions.
• They don’t support Spatial Audio/Dolby Atmos(E-AC-3) music. Doesn’t matter if they are m4a or flac. Again, nothing about transcoding in the dashboard but the sound will be horrible. It does at least show in Plexamp that the song is playing as Opus. I know everyone says multichannel music isn’t worth it, but I wanted to try it out and was very disappointed when Plexamp wouldn’t play them.

These probably aren’t issues to the majority of users with just their favorite songs in mp3 or flac 16-44, but it’s something for people with larger hi-res/multichannel libraries to be aware of that I recently learned.

I just bought a few refurbished 12TB WD Ultrastars off Amazon and it actually says it’s sold by ServerPartDeals. Not sure if it’s the same people but interesting if they are

Ubuntu was my first Linux desktop distro and I’ve been using it for 4ish years. I really liked it but I no longer feel like I can trust canonical after the whole ‘secretly install Firefox snap when installed with apt cli’ thing. It wouldn’t have even been a big deal if they just said it was only available as a snap but the execution pissed me off to the point of switching

Yes it looks like it is included in the official docker image

It looks like it should be possible as both your cpu and motherboard support Intel VT-d

https://ark.intel.com/content/www/us/en/ark/products/236781/intel-core-i7-processor-14700-33m-cache-up-to-5-40-ghz.html

https://download.asrock.com/Manual/Z690 Extreme.pdf

PCIe pass through isn’t enabled by default in Proxmox and requires some manual changes to the bootloader (grub or systemd-boot) as well as loading some kernel modules. You may also need to enable VT-d in your BIOS. You can read proxmox’ guide for enabling PCIe pass through here:

https://pve.proxmox.com/wiki/PCI(e)_Passthrough

Thanks for the info! Looks pretty cool I’ll have to check it out

This is the first time I’ve heard of Victoria Metrics. It looks like it has a similar use case as Prometheus, is that correct? If so, what made you or your team choose one over the other?

You can always do both and expose some services outside your network and keep the others local only while still being able to access them yourself with a vpn.

From what I read disk wear out on consumer drives is a concern when using ZFS for boot drives with proxmox. I don’t know if the issues are exaggerated, but to be safe I ended up picking up some used enterprise SSDs off eBay for that reason.

I haven’t tried any of them but I did just listen to a podcast the other week where they talk about LlamaGPT vs Ollama and other related tools. If you’re interested it’s episode 540: Uncensored AI on Linux by Linux Unplugged

Sure if it fails completely it will, but it doesn’t catch everything. Here’s a related story I have:

At work we had a bunch of Lenovo X1 Carbons running windows that would have the usb-c ports die seemingly randomly on users which was a big problem since that’s also the charging port. There never seemed to be any similar root cause connecting the incidents and Lenovo’s support wasn’t any help. Our entire company is remote but luckily we had onsite support so for a while they would just come by and replace the whole motherboard each time.

Finally one day while scheduling a repair the support guy I was talking to just said, “Oh I’ve seen this before. It’s just a bad update and resetting the CMOS battery by putting a paper clip in this hidden hole fixes it.” We had the user try it out and the ports worked fine again. Apparently they had run some windows updates that failed silently and were causing the hardware issues.

From then on any time a user has had a hardware issue we can’t figure out we just have them try the reset and it has worked every time. This only happens probably 3-4 times a year but we only have less than 40 of these machines so not an insignificant amount.

You can use a VPS or cloudflare in that case

It’s a satire account

I’ve been lied to

8th gen is when support was added for HEVC I’m pretty sure

We are all AI on this blessed day

Looks like the docker images built by mattermost are only for amd64 architecture . You could try an image built by someone else such as this one that seems to be regularly updated. I haven’t used any of them though so I would look through the repo/dockerfiles before deploying any unofficial images.

Thanks, I may hold off on ceph for now in that case

Unfortunately the drives in the enclosure are 3.5. I do have a spare SATA spot in each of the 7040s but you can only fit 1 SATA drive in the 3040s and no m2 drives. That’s why I am trying to decide whether it would be better to sacrifice a SATA port on one of the 7040s for (hopefully) better speeds and stability or use USB and put an extra drive in each of the 7040s