by a very specific definition of “inside”

had almost the same line of thought, that some leader’s term got over

Well it depnds on what amount of cost you want to put in, and how are you making the roundabout, and are you going to put something on it, and essentially wht budgets you have. Where I live, we almost always have some statues or soemthing put on them.

They are made with essentially make shift compasses where I live. This is what is done for a roundabout of radius, lets say in ball park of 5-10 m. Initially marking is done (this is simply done by measuring out a tape of desired radius, and holding wwhen end at center, and other person revolvinng around it, and laying down something - could be simple as white chalk, or use jackhammer to make actual indents to ground, or lay down some bricks) This will serve as guide for curve, and any further curved elements could be made by just maintaining a constant distance from this circumference. Then the interior is usually dug to lay a foundation for whatever you put on it (could be as simple as excavating, and just plastering, but that is still expensive, often manually digging and then laying a firm dirt layer is enough). then it is covered with something (could be custom designed pizza slice shaped stone or marble wedges, but usually just bricks or cinderblocks). While making, we do not really make a great curved edge, and just make a n-gon, where n can be 20 or 50 or 100. This is simpler because straight edged bricks are cheaps, and you can lay them vertical, filling the gaps with plaster. The depending on your budget, you could get great finishing, again done with applying plaster, but this time, excess is applied, and some is removed, so we get a curved edge. Now you mostly have the exterior ready. On the top, you could have marble or stone, which can be grinded to match the curved edge, or it could be a thin plaster layer, which will take the shape of boundary.

Essentially, all children games work - you can just make then hard, or raise the stakes to your taste

musical chairs (song plys, everyone dances, song stops - you have to grab nearest seat - for n players, start with n - 1 chairs, so someone is eliminated - now reduce the chair by 1 and repeat)

atlas - take places names - someone has to say a new place starting with last alphabet of last name.

antakshari (consider it as musical atlas - you start with a song - next song has to start with the last alphabet/sound of lst song)

these 2 can be played in teams, and instead of finishing game as soon as someone loses, you can have pre determined punishments (for example, they have to dance, with 1 leg in air, and a hand over their head)

passing the parcel - song plays - you pass the parcel - when song stops, the person with parcel gets the “gift/punishment” (punishment similar to above)

charades (or dumb charades) - you have to make someone else guess what you are acting/narrating out

i am not sure, but what i think i read somewhere is “ren” (as in pa"ren"t), so you would go like my ren dropped me to school or something.

well, would you be interested in befriending me?

me too, if you want one more

I am a mod, recieved such messages, and have reverted decisions. Often jsut knowing the person on other side is a human person, with some senses, gives you enough confidence to unban

the current problem with journals is that there is no money in it for authors. journals oly exist because of historical reasons, and older folks still value them.

Arxiv exists as a semi journal, which is some what cc4 (or some other cc of your choice) and that is great, but still one source.

You can just host your research papers as websites, as in just a web article, and use some vcs like github, codeberg, or self hosted forego system. That is arguably the best case.

I have a paper which is on arxiv, and my supervisor has been “polishing” it for a journal, but to me that is a useless process, because i almost never care about things like journal impact factor or h index. to me, the only thing valide is steps for reproducibility, that is, give me a recipe, and if i can recreate, then you did a great job. This could mean, for example, releasing all your raw unprocessed data.

how to handle reputation for who can review, but I think there are ways to do that and that’s beyond the scope of this post as I imagine it could get pretty complicated and would require feedback from people actually in the industry. The reviewers can submit comments and reviews back to the author via federation, but this time the process can be open instead of behind closed doors.

one of the reasons reviewers are effective is that the remain anonymous, that is why they can shit talk a lot. You would not have the slander, if you make the identity real.

I think we should not have reputation or verification, as i stated above, if you post on your own website, and not have gatekeeping. Yes a lot of the work may not meet “some standards”. but even with current system, a lot of work is published which is substandard. if we can release work in open, and colaborate as we do for open source software, thart would be the ideal thing for me. Each issue could be a literal git issue, each correction can be a pull request, and so on. Fully transparent, and somewhat resistant to whole network failing. (assuming you have local copies, you can just spin another instance, and your paper still stays onloine)

In our home we have “coolers” (the big kind with metal bodies and large water storage, and padded, perforforated walls). It is outside our house and blowing air inwards. We try our best to seal the area around window with lots of cardboard, fibre sheet and thermocol, and then depending on time of day, confining the space (by closing other doors in home). It is not AC cool, nor is it really effictive when it is hot (50+ C) outside, but other time it works fine. In the nights it does a pretty good job (good enough that i have caught a cold right now). When we do not want the noise, we just run the water pump, so occasional winds from outside come and are cooled by the running water. Water usage is slightly high (we usually require one filling a day, which would be 40-50 litre water i guess), but we sometimes keep cycling between pump on and off to conserve some more water. If noise is a big concern to you, you can try to basically cover whole of the front (with some sound insulating material, like fibre sheets(the polymer ones often found in packaging)) and then make some side channels for air. Or something more simple is using lighter curtains just in front of cooler. This will break the flow of air, but if you have sealed rest of the are, so air can’t leak elsewhere, then you would get air breaking its flow and flow around the obstacles and reach you, but not as loud. We do something similar, we have not covered fully, we have left partially open (60 % i guess from the middle) but to cover noise, we partially close it by window (which is kept in place by curtain over it) so we get a tighter channel of air (as it bends around the edge of window). If you stay in the channel, you get large air flow, but more noise, but if you move away from it (from my casse, even by a foot) then the noise is cut in half. The rest of the room is now cooled by this air current mixing with rest of room air. If room is large, t=you may also have to turn your ceiling fan on for this, but we do not have to.

In really peak summers (and peak hours of the day), we use ac for few hours (1-1.5 or 2) and when it gets cooler outside, fall back to cooler.

can’t disagree

In India Fieex deposits for a period of ~400 days offer that. For lower periods it is lower. It is not a great investment if you account for inflations (that would be another ~5%, so after a year, the effective value would be close to 1.07/1.05 ~= 1.0190476)

If there are no universal truths, then that would be a universal truth, self contradicting

Probably make a fixed deposit with the principal of 1 Million, and then after a year, (Assuming annual interest rate of around 7%) I would get 1.07 million, and give you 1 Million back, and still have USD 70,000, which is still a good amount to get for free. If we get quarterly interest rate, it would be slightly higher, so will try for that

I don’t know what is concerning, me knowing how to read this, or being able to read this even when I am not from a sms generation (not that i am very youung, but where i live, sms was very expensive, so many people did not message untill we had internet based messengers)

May I ask, Is it functionally equivalent of proprietor-ship? (share holding is with one person, but they may have employees or contractors or free lancers) or completely single person business?

forgotten

If you want to publish, please do 2 things - find a publisher which does not necessitate exclusivity (as in, you do not necessarily have to just publish something on there portal) - and secondly, make a portal of your own, and publich a duplicate copy there. This serves 2 purposes, if someone really wants to follow your work, they can just follow your website, and in case a future bait and switch happens, you have a backup of all your work.

If you want to publish, please do 2 things - find a publisher which does not necessitate exclusivity (as in, you do not necessarily have to just publish something on there portal) - and secondly, make a portal of your own, and publich a duplicate copy there. This serves 2 purposes, if someone really wants to follow your work, they can just follow your website, and in case a future bait and switch happens, you have a backup of all your work.

don’t upload directly to lemmy, use some other image hosting. to cut on costs, lemmy servers can either have (adjustable) file size limits, or (optionally) compress the image