K2 is very lightweight imo. And it fits easily in all my bags.

I have a Keychron k2 with the German layout and the PBT Retro caps with Blue switches and I am more than happy with it. Very lightweight and portable and the 3 Bluetooth slots are handy. I know it’s not the best one out there but it gets the job done pretty well.

I will do foam padding and o rings in the future to reduce the hollow sound and the bottoming out of the keys. I dont low well the other keyboards are made in this regard.

You will eventually need a wrist rest with the keychrons due to their height. Also the battery life is not as great as it could be. I am most of the time directly connected to my MacBook so I won’t notice this much but I know that the battery lasts around 1-2 days of work depending on the type of lighting you choose.

Hope that helps somehow.

The problem is more with zfs on consumer grade NVMes. I have/had problems in that configuration due to the bigger sector sizes. Proxmox itself does do frequent writes, but I don’t know how often exactly. I know that my problems went away with not using zfs.

https://www.reddit.com/r/Proxmox/comments/idlqh3/zfs_extremely_high_ssd_wearout_seemingly_random/

I wouldn’t suggest usb or sd-cards with proxmox due to its constant logging. You will fry them really quick unfortunately. Had that problem with NVMes.

For litterly anything else I would also suggest SD-Cards.

Hey, i have had the same trouble on an DL380 G9. Those bioses don’t support booting from PCIe at all. My server can’t even boot from drives from the Raid controller in IT-Mode.

I would suggest, by proxmox being a hypervisor, to just install proxmox on a single SATA disk and try to boot from there. This is what I have done in the end.

You can then use your NVMes as storage pool. Also you bifurcation can always also be a problem when trying to boot from those devices.

I would also as a last call try to disable bifurcation and see if one drive will show up. Maybe then you could use 2 real PCIe slots with cheap m2 to PCIe adapters.

I suspect nextcloud having performance issues with slow Disk IO. With rootless containers I had a much worse performance than rootfull. Also using MySQL Backend instead of SQLite did speedup the performance.

Nevertheless I have the same problems with nextcloud as you stated. Pretty much not as usable as I thought.

Tbh I wouldn’t use languages but rather chainable configurations. Those could be yaml, JSON, toml etc.

I really dislike running any dynamic code for those things. I mean you really only need rbac providers and/or auth providers.

Maybe I underestimate Polkit by a far at the current state, but the 2 times I used it could have been a config file.

Cries in Polkit

Love the fact that 100km is “near”. You would be nearly in an other country in Europe.

But that’s just insane for a 110k city. I mean I get it, it’s Cali and has a coast. But 1.2m for a normal home is just borderline undoable.

Are prices in small towns also exploding?

Compared to North America, including Canada it’s s whole lot better. Even the expensive city’s are more “affordable” than anything I’ve ever seen from the posts about new York.

But never the less it is still expensive.

Would suggest raid0 for maximum read speed /s

There are plenty of options, I will have to look up which are currently the best.

But I would recommend starting out with a normal “cube” like design. Delta printers seem cool but are not really beginner friendly.

To further ease the search I would look for a direct drive extruder. It’s easier to calibrate and you don’t have the hassle with potential problems regarding the Bowden tube.

Creality and Anycube are the goto brands for big community support, as far as I know.