I’m 99% sure it’s 26,000lbs at least for a straight truck non combination.

Source: I used to be a CDL A holder

Are millennials destroying democracy?

This seems like a good course of action compared to how most breaches are handled.

Depending on your transcoding needs you might not even need it for that.

I have a proxbox with a R5 4600G even under extreme loads the stock cooler is fine. Honestly once prox is setup you don’t need a GPU. The video output of proxmox is just a terminal (Debian) so as long as things are running normally you can do everything through the web interface even without the gpu. I do highly recommend a second GPU (either a G series CPU or a cheap GPU) if you want to try proxmox GPU passthrough. I’ve done it and can say it is extremely difficult to get working reliably with just a single GPU.

I’ll freely admit to skimming a bit but yes proxmox can run trunas inside of it. Proxmox is powerful but might be a little frustrating to learn at first. For example by default proxmox expects to use the boot drive for itself and it’s not immediately clear how to change that to use that disk for other things.

The noctua dh-15 is overkill for that cpu btw unless you’re doing an overclock which I wouldn’t recommend for server use. What’s your plans for the 1060? If using proxmox you’ll want to get one of the “G” series AMD CPUs do that proxmox binds to the apu and then you should be able to do gpu passthrough on the 1060.

I’ve been using Kagi for 3 months now I think? And I’ve found it to be extremely useful for research…to a point, my only real issue is that after the first or so series of results it either doesn’t offer anything further or just no longer is showing relevant results to my search. Honestly though I’ve been very happy with Kagi and continue to pay the 10/month but if I do find something even better I’d happily switch. I’m not married to any particular search engine (well …least not to the extent of using Google services).

If you’re skeptical just give it a try I think they have a trial system in place.

Half the battle with headphones tends to be isolation. If you have decent sounding speakers but bad isolation you have mediocre at best headphones. Typically replacing the ear cups can be an option but adding speakers likely won’t yield additional quality. Unfortunately if the speakers that already are in the headphones aren’t up to snuff there won’t be a whole lot you can do. It’s important to make sure we’re talking about the actual headphones though and not the audio amplifier or the source audio.

Wait till you see the enterprise side where you may find a panel that is virtually identical to something from windows 2000

I’ve noticed that people are very quick to downvote here for seemingly no reason. It’s best to ignore it.

Coil whine is something modern electronics tend to (suffer might be the right word?) From and unfortunately there isn’t much you can personally do. The coil whine itself is caused by the power delivery circuit.

This is general information not specific to the FW laptop. If you’d like to learn more id look into GPU coil whine as that’s usually where it is discussed the most.

This is fairly concerning behavior but might I ask what the original issue was?

Disclaimer: I do not yet have a framework nor have I even begun the ordering process. I’m awaiting solid reviews on the Framework 16. I am just a random nerd.

Can you go into details?

Had to look this up because I never realized there was a difference.

You are correct.

Yeah I never understood it myself. I once had a run in with one of those “hard ass types” while on a little virago 250 and they proceeded to lecture me on the ways of the roads…which was entirely just giving them right of way always no matter what. He was annoyed at me for passing him on a 250…in traffic.

3 cats with a litter robot 3 after 3 years. It’s great, easy to repair and parts are available. Save your money and buy a litter bot 3. The 4 has some improvements (it’s quieter) but has some new flaws and a pretty stiff price increase.

Also check out one man six cats on YouTube who has been doing a litter bot mega test of all kinds of brands/styles with his 7 (yes 7) cats.

Back on that site that sounded like read it I asked some of these people and it just boiled down to “because I can/freedumb”.

I’ve been on plenty of shiny new full fairing machines and they always remind me of just how easy it is to work on my KLR. I really like that in 15 or so minutes I could probably have the bike down to whatever part I need and probably also fix it without resorting to a shop.

I’ve lost I think 5 personal friends who rode. You know what each of them had in common? Wreckless driving.

I’ve often wondered why people gravitate so much to quarter and even half helmets for this reason. They do protect your head better than nothing but also expose your face (in the case of a quarter helmet) to the ground.

I actually met someone with a ninja 1000sx and they love that thing. For a while I had a concours 1000 that I adored but that has since turned into an indefinite project bike :(