Gotta make sure everyone’s prepared for WW3.

Noticed it too lmao

Well now that you mention it, both!

I’ve never heard of this guy in my life and now I’m non-stop seeing memes about him. Did something happen with him recently?

30 years for a little date rape is kinda extreme

Brother, are you hearing yourself right now?

Have none of these people watched, like, any sci-fi movie ever?

RIP. Heaven gained a real All-Star today.

Eh that threw me off when it was new but it’s been a thing for about a decade at this point. My work is all-in on Azure and this has never confused any users as far as I’ve seen, and we’ve got some incredibly ignorant users. Everyone just hits “browse” from that screen and you’re back to the old school save screen.

Right? Seems like Linux fanboy propaganda. If you don’t know where your file saves to, you’re probably incompetent and shouldn’t be near a computer. Even the most incompetent of users in my 15 year IT career know how to save something and where it’s saving to.

I have an Ender 6, which is a super common printer. Not on the same level as the 3.

Voron isn’t an application, though. It’s a type of printer.

Novel or bespoke printer? Not sure what you’re talking about, but it’s supposed to be universal firmware. There are plenty of guides out there and folks running Klipper on all sorts of printers, including mine. They just aren’t well-written, or aren’t written for beginners, or assume you’re a pro that doesn’t need anything explained.

This is exactly what I’m talking about with the 3D printer community. I’ll say one thing, and then someone will say something completely unrelated in response, like you just did.

I ask, “Hey, can anyone with (insert my specs here) show me their Klipper config or Slicer profiles for reference?” and I get 100 responses asking me why I’m using the hardware I’m using, recommending me other hardware that they like, telling me to use a different slicer that they like better, telling me if I don’t tell them my issue or show them pics of my prints they can’t help me (I never asked for help with prints, just to look at someone’s config with similar hardware), downvoting me for not already being a 3D printing pro, and just generally being unpleasant and literally answering anything but my question.

I work in tech. I’m used to Googling answers, hitting up forums, digging through old posts, etc. It’s about 50% of how I get my job done. There is something fundamentally wrong with the majority of the 3D printing community.

Not bashing this community specifically, as it’s too new to judge and so far people seem helpful and nice, but this is a problem I run into everywhere I turn to for assistance, like GitHub, Reddit, Printables, and various other manufacturer forums. The 3D printing community is pretty dogshit.

Let’s make this a much better community than literally everywhere else (which shouldn’t be difficult at all). When you post your setup, post your full specs with your firmware config and slicer settings. Is there a way we can tag ourselves or add a profile/signature? Maybe we can even put links to our specs.

So much of the 3D printing community seems to want to kill it by scaring off all newcomers. We can make this place the definitive stop for 3D printing knowledge, questions, and configs, but it’s going to take the work of some mods and the entire community to get there.

Share knowledge like the rest of the tech enthusiast world. Your Klipper config isn’t some super secret proprietary code for your eyes only. You don’t have to guard it like it’s your virginity. This hobby is going to die outside of super corporate builds with zero after market parts or builds like the Bambu X1 if the 3D printing community as a whole doesn’t learn how to share and not be a dick.

At this point, if you get an Ender 6, Manta E3EZ+ CB1 EZ2209 drivers, I’ve got you on my config and setup instructions. Otherwise, I would stick to a printer like the Bamboo X1 that does all of the slamming your head against your printer for you.

Klipper is great… Once you get it working. Way better than Marlin, but good luck getting it to work.

I swapped my motherboard for a BTT Manta + CB1 + EZ2209 drivers. Took about 7 months to get it to a state where my prints are regularly okay. Every 3D printing community I’ve come across is less than helpful, and all Klipper documentation is written like you’re already at a pro level, as does pretty much every other guide out there. People will swear it’s so easy, but you know what helped after 7 months of tinkering? Myself just throwing everything I have at my config in hopes of something working.

What kind of printer do you have?

You probably still struggle to talk to people and make friends too, huh?

Are you in my head, bro? Or do you just need to pull your own out of your ass?

Right? Such a trash article that explains nothing about why this is happening.

Whew, had to do a triple-take on that post title lmao.

It’d be nice if there was a name for something like that.

Synced menstrual cycle?

I have two older brothers. One is an unhinged hypochondriac that’s gets off on fighting with people, and the other is a white supremacist. Haven’t talked to either in about 5 years. I have a brown daughter.

Isn’t that why the protests started in the first place? A girl was beat to death by them? I don’t see what they’ve got to lose.