They were invented decades ago.
They have fewer moving parts than wheelbois.
They require less maintenance.
There’s obviously some bottleneck in expanding maglev technology, but what is it?
If you introduce a new rail type into your rail network you can’t use your existing fleet of trains on that section reducing the ROI on that train engine or carriage. Also, any train you purchase for the new rail type will only ever work on that system lowering their profitability in the long term.
A million times this. Mag-lev only works for either super dense routes where the added cost as you describe can be displaced by the immense value add of shorter and generally more comfortable travel. Or in nations that can force through decisions from the top down, such that cost becomes almost a non-factor like China. Rail in general across the western world is a weird mix of nationalized and privately owned companies and operators, such that introducing mag-lev with the intent to replace conventional rail would require compensation to the private companies who have invested billions in the current infrastructure else they simply won’t be part of the new one, with all the issues that entail.
From an environmental standpoint it’s also really hard to see an ROI in scrapping something that works in favor of mining, constructing and spending intense amounts of energy in all forms to build something better but only moderately so. The biggest improvement is moving from trucks to (electric) train for freight, going from electric train to mag-lev is only slightly better so the ROI just won’t be there.
I would suspect it would be complex to design mag-lev for all the various types of loads trains for be subject to. Wheels are fairly versatile and have a wide range of loads.
Also the fact that ‘less moving parts’ doesn’t mean lower complexity or maintenance cost. Train wheels are a very robust and efficienct mechanism and most train designs are not being limited by them.
Very robust because they have 300 years of research, innovation, materials science and manufacturing in them. Making them incredibly stellar, well understood, damn near perfect technology for what they do.
Also them just being wheels in general which are one of the most efficient and simple ways to move stuff.
There are some concepts for hybrid maglev-rail tracks that would at least solve the first point, similar to how rail was electrified over time. It would still be very expensive though.
Recent demonstration https://www.youtube.com/watch?v=CQOEP7_euXQ
woah this is awesome!
maglevs need classical wheel systems anyway because there might be a power outage, so simply having wheels that are compatible with the local rail system is a brilliant idea.
add in a tiny propulsion system so they can use the normal tracks at low speed without the help of the maglev tracks and you can sort of blend the two systems together in critical locations like switches and train stations.
Here is an alternative Piped link(s): https://piped.video/watch?v=CQOEP7_euXQ
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
Because it’s not currently profitable in most cases. Capitalism ensures that the merit of an idea comes secondary to it’s profitability. We don’t get the best things, we get the profitable things.
Not to defend capitalism in general, but it’s really good at answering these sort of “is it worth the cost?” aquestions. The whole point is to allocate scarce resources efficiently; the problem is that it assumes nobody is a scumbag and all the costs are accounted for.
deleted by creator
You can’t.
deleted by creator
It isn’t. Most decision makers of capitalism are very unaware of science. You’d know this if you work in research. The ideas that see light of day do so not because they’re good in any quantifiable sense. It is because they convince the capitalists. This can be affected by so many things that aren’t merit or even cost based.
Some things make sense from a cost perspective, but not a profitability perspective. Profit isn’t just about cost. There’s margins, competition, longevity, etc. Something can be of moderate costs, but if the margins are too low or it is too long term or a project, it is of low value to capitalists.
I’m really struggling to understand what you’re getting at here.
Whether or not a decision maker is aware of science, their products will still be subject to the laws of physics.
Some things make sense from a cost perspective, but not a profitability perspective.
For example?
I think OP is just thinking of “cost” to mean capex. Whereas most real-world cost evaluations consider capex, opex, and opportunity cost, among others. Something having low cost but low margins will usually have a large opportunity cost, which increases the total real cost.
To simplify it, when capitalism answers “is it worth the cost?”, it is not answering “is the benefit of this thing to society worth the cost?”. They’re answering “are the profits I would get out of this and the risk worth the cost?”. And profits do not always agree with what’s good for society.
One example of moderate-to-low cost investments that are of demand in society but not very profitable and hence does not see focus is low-income housing (at least in the US). Housing developments disproportionally target high income or even luxury housing, as the margins on those are far better (but the costs are also much higher). Even nowadays, that this trend has been going on for a while, and luxury housing has really fallen out of demand (which greatly increases the risk), it continues. Luxury housing still looks a better investment to investors, when society does not need more luxury housing. It needs more moderate and low income housing.
To simplify it, when capitalism answers “is it worth the cost?”, it is not answering “is the benefit of this thing to society worth the cost?”. They’re answering “are the profits I would get out of this and the risk worth the cost?”
Perfect
It’s also really good at “externalizing” costs one does not want to factor in – making it worthless for the stated purpose.
The current, dominant form of capitalism isn’t and doesn’t, though. It maximizes short-term profits and ignores all other medium and long-term costs. The efficient allocation of scarce resources doesn’t happen when inefficient allocation yields greater short-term profit. The stock market ensures that high short-term yields with lower total returns will be favored over the inverse. In particular, it emphasizes competition over cooperation, which is more resource wasteful for the gestalt.
What kind of benefits are there to maglev trains that are not cost related?
They’re faster and more comfortable than traditional rail. They could help to reduce air and vehicle travel
They’re not that faster. Conventional train speed record is 574.8 km/h, Maglev record is 603 km/h. Maglev price doesn’t justify diminishing returns.
And how about the actual speeds they are used with? Another poster suggested the maintenance costs of traditional speeds skyrocket as speed increases, while maglev doesn’t really have a lot of stuff that wears down in the first place.
All but one operational Maglev lines run at speeds below 160kph. Which is way lower than conventional high speed railways which usually run at speeds over 300kph. Also “non high speed” conventional railways in the UK have a top speed of 200kph, which is also faster than existing maglev lines, lol.
The only exception is Shanghai Maglev, which tops out at 430kph. But that line only exists as a Chinese propaganda tool.
I doubt conventional trains are regularly traveling at the speed record. Thats a poor way to compare the speeds of things.
Then it’s good that we don’t have them, isn’t it? Kool_Newt’s post implies that it’s due to a failing of capitalism, but this sounds like a win to me. I’d rather my money go towards food and housing than a faster or more comfortable experience doing something I rarely need.
One of the most common flights is US west coast to east coast. Normal high speed rail can’t do this in a reasonable time frame. We need something faster if we want to get reduce those flights.
One of the features of capitalism is externalizing the costs, especially of pollution.
Ah, that makes sense. So maglev is overall cheaper but still less profitable because the costs are paid where they’re incurred.
Cheaper than flights? You’d have to do the math on it. We may have to accept that some things like travel will be expensive. But right now it’s not feasible Wrt to time to take a train or even HSR coast to coast.
Sure, but if it lessens the impact on the climate from air travel and vehicles, then it’s a good thing. Especially if they can become reliable and convenient enough that people don’t need to have their own vehicles to drive everywhere.
That’s the dumbest take ever.
Care to explain why?
It is scientifically proven that high quality public transport, and especially train services, improves the lives of people and improves the economy.
Money spent on food is a total waste. No matter how much food you buy for people, they will eat all of it and will ask for more. Simply because you need to eat every day of your life.
This is also true for housing to some extent, as populations generally tend to grow over time, thus more and more houses will always be needed no matter how much you have built already. But houses take a lot more time to run out of as you don’t need a new house every day, only once every few years when the population increases.
But you can build a good railway system in the area once and then people will use it to earn their own money, to pay for their food themselves and to buy their own homes themselves. And they will also pay for railway maintenance and bring profit to the budget as well. It’s a one time investment which lasts virtually forever.
The government should invest in long term solutions: infrastructure, education, etc. There’s really no point investing anything into short term solutions. Housing can be a long term investment if done properly though. But that’s an off topic.
Thanks. So it basically comes down to externalizing costs again. Those who build the trains don’t see most of the profits or the costs that come with it, so they optimize for the parts that they do see.
Regarding food, I as an individual need to eat every day, and I need to pay for that food. I’m not going to just not buy food because I’ll need it again tomorrow. It doesn’t matter if the government provides the food or I buy it myself, it’s still money that needs to be spent on it. One could argue that food security also leads to similar second/third order effects by freeing up that mental real estate dedicated to survival and allowing it to be used for positive contributions to the community, though I don’t have data to back this up so it’s just speculation. Similarly, if the rails are public and built using my tax money while providing me with no value, I would consider it to be wasteful as survival takes precedence over comfort. If it’s private and not profitable, then it means no one wants this for the price it takes to build and maintain, so it was a bad idea to have it in the first place. But either way, this is all moot because it’s a conclusion reached from incomplete information. I’m down for public spending on this if there are higher order effects that everyone benefits from.
deleted by creator
Better acceleration, steeper inclines, tighter curves at same speed, better ride quality and less wear. As someone has mentioned below, normal trains could go a lot faster than they do in practice, because the ride quality, wear and wind resistance get atrocious, and the tracks need to be exceptionally straight. Making a maglev go fast is more feasible, though you still have the wind resistance issue obviously.
Where are all the maglev trains in non-capitalist countries? Sooner or later, in any system, someone has to do a cost benefit analysis and decide whether it’s worth it. It’s not just about profitability. There are plenty of situations in the US where something is unprofitable but still funded because the benefit is worth it.
Dude, without capitalism we’d be living in flying maglev RVs on mars with free robot labour bro
Three of the six currently operating maglevs are in communist china
China is very much capitalist and has been for at least three decades now.
deleted by creator
Where are all the maglev trains in non-capitalist countries?
There aren’t really any non-capitalist countries except maybe like N. Korea, which is not known for deciding things on merit.
There are plenty of situations in the US where something is unprofitable but still funded because the benefit is worth it.
I suppose, in some rare cases where there is not heavy lobbying and massive industry resisting it in an effort to preserve their power and wealth.
“MVP” stands for “minimum viable product”.
It’s basically evolution. It’s not that we don’t get the best things, it’s that when something evolves traits that require more energy than they are worth, they inevitably die out. I’m reminded of the film The Man in the White Suit.
It’d be nice to always have the “best” things, but the “energy” to support them has to come from somewhere.
But unfortunately the mechanism that is dictating which traits are carried through and which are left to die out, is capitalism. Not just that, but short sighted capitalism.
I’m not saying maglev is the be all and end all, I’m just saying that this “evolution” is sort of (extremely) fucked.
True. Similarly, unfortunately the mechanism that is dictating which traits are carried through is natural selection. Maybe this metaverse thing has some benefits after all 😆.
The way I see it is, if you have a set of entities all acting in their own best interest, the way they engage with each other is called “capitalism”. If a subset of those entities band together to act in the interest of their communal group, the mechanism within the group might be “communism”, but how that group interacts with other entities/groups is still capitalism.
It’s no coincidence that China, a communist state, is one of the strongest players in the wider capitalist economy. And even if the CCP was 100% benevolent toward everyone, they would still only be able to justify spending that makes sense at the global level. This is why they’ve opted to no longer buy our “recyclables” as raw materials. Sure it would be nice to always recycle stuff, but it was polluting their rivers, costing them more in healthcare.
At the end of the day, capitalism IS economic natural selection. So I view a government that embraces unchecked capitalism as a government that does nothing.
I think our best chance is if people to view a maglev train (and the benefits it offers) more like going to the moon: it’s inspirational. It gives people something to look at and say “look how far we’ve come” both figuratively and literally. It’s not impossible to fund, we just need to all value it so much that we’re all willing to divert funds from other places where they probably make more sense, i.e. act in a common interest. But we can’t even do that for healthcare so…
While I agree and disagree with several parts of your sentiment, asserting that a mechanism fuelled mostly by the 0.1% or 0.01% of its constituents is “natural selection” feels a bit disingenuous. It’s selection, but it doesn’t happen by nature. The driving forces behind a lot of the changes that happen are backed by intent (of the players with the most power), not environmental fitness.
And calling China a communist state is a disservice to communism, they call themselves communist but its about as apt as trump calling himself a feminist.
It’s interesting to hear you say it doesn’t happen in nature as though we are outside of nature. It seems pretty clear that the phenomenon that is currently happening does happen naturally. Natural Selection isn’t without local minima/maxima. Rapid environmental changes cause them all the time, and we’ve seen a lot of change in the last 100 years.
It sounds like you’re conflating wealth inequality with capitalism. Those are two different concepts entirely. Capitalism with appropriate limits can lead to healthy competition, and a self-correcting economy without risk of a misguided government accidentally creating a bubble that then pops and hurts everyone. The government should specifically be there to pop bubbles before they become too big, and if they do get too big, ease the impact to its citizens as it deflates. Without the appropriate limitations in place, often times the best “capitalist” option is to buy government influence and cause exactly these kinds of bubbles to happen, benefit from it, and then step out of the way when it pops. Which is where we regularly find ourselves today. The issue is compounded by people using phrases like “just pick yourself up by your bootstraps” to justify a do-nothing government.
I agree with you about calling China “communist”, but I was deliberate in my argument. It’s not relevant that China is a totalitarian dictatorship, I was using them as an example of an entity that is decidedly not capitalist internally, but inevitably has to be externally.
The same reason supersonic passenger jets are rare.
The extra speed comes with a massive increase in costs.
Travel 30% faster than high speed rail for 10-20 times the cost.
Is the claim about “10-20 times the cost” true? The internet says Shanghai maglev cost $1.33 billion for 30.5 km, i.e. less than $44 million/km. Compare https://transitcosts.com/new-data/ or https://transitcosts.com/high-speed-rail-preliminary-data-analysis/
Secondly, if it is true, why would it be true? Why would it be more expensive to build something with fewer moving parts?
Supersonic passeenger jets require more energy. Maglev trains require less energy.
all the other complex and important factors aside, air restistance is a formula of speed squared. Meaning for example if you bump speed up by 40% you double air resistance, and therefore double the energy cost of transport.
Isn’t that only applicable for identical trains? For sake argument, if you had two identical trains designed with poor aerodynamics, one at 100mph and one at 140mph then you can double the energy cost. But if you take two different trains with one designed to be more aerodynamic, at the same speed they wouldn’t have the same energy cost as the second has a better profile?
Plus theres less friction from needing to be on a rail.
So I think saying its double the cost of transport is too simplistic to be meaningful in this discussion
It’s more than that - doubling air resistance only doubles the energy use if it’s the only inefficiency on the train (e.g., no losses in the magnets, HVAC, lighting, etc.). Add onto that the fact that you’re basically eliminating rolling resistance from traditional trains when switching to maglev, and the expected outcome should be much less than double.
Finally, the most important part, each high speed rail route of any meaningful distance has the opportunity to displace a certain amount of air travel, so big picture, HSR results in a significant decrease in overall energy consumption.
Is that factoring in the always on cooling of the magnets?
Here’s an article about the subject, paper linked at the bottom of the article: https://phys.org/news/2010-12-high-speed-pollute-percent-traditional.html
Thx, as I understand it, this is calculated for traditional railway technology and does not have anything to do with to maglev.
Maglev requires superconductors to work. They must be cooled to just a few degrees above absolute zero (typically ~ -270 celsius) and if they ever warm up beyond their critical temperature, catastrophic failure is the result. (this is called quenching which can destroy the superconductor permanently) So not only can you only drive maglev trains (which are expensive themselves) on maglev track and can only drive mag lev trains on maglev track, its far more expensive to build and maintain superconducting infrastructure than it is to lay down some steel rails. Maglev trains are used because the only friction that they experience is from air resistance. Theyre much faster than normal trains but it takes a lot of energy to keep the superconductor that makes them work cool, costs a lot more to build and requires a lot of electricity to get them up to speed. (They can use regenerative braking to recover much of this but its still an energy intensive process)
Japan is in the late stages of developing a maglev section of the Shinkansen. It has liquid helium cooling for semiconductors and lots of considerations to make sure the cabin and surroundings aren’t exposed to very strong magnetic fields. It’s just more expensive to do all that.
After Japan rolls this out and works out the kinks, it might get cheaper since a lot of they’ve done a lot of the development.
Maglev’s top speed record is just 5% faster than conventional train speed record. Thus if Maglev is more than 5% more expensive, then it doesn’t make any sense to build them.
Speed records aren’t usually representative of regular use top speeds, are they?
- construction is Hella pricey
- there are few maglev manufacturers, allowing vendor locking and exacerbating the first point
- they must be built grade-separate, which can complicate route planning
- they are incompatible with existing rail tech, which results in having to build new, expensive infrastructure for 100% of your route, further exacerbating the first point
- their switches are slow, limiting capacity
Ultimately, their competition is regular trains, which are simpler, more tolerant to buying from multiple manufacturers, still significantly more efficient and faster than anything roadborne, able to switch over the course of seconds instead of minutes, able to interoperate with different tiers of intensity and speed, able to be built at grade, cheaper and having the better part of two hundred years of technological refinement behind it. Ultimately, maglev has specific, niche advantages that make it a hard sell for any system that already has regular rail.
A lot of these arguments apply to high speed train. In France a completely separate line was build between Paris and Marseille for the TGV To reach its peak speed without being delayed by lines that stop at every station.
The problem is investment and shitty companies holding these technologies IMO.
To compare our bullet points for maglev and high speed & conventional rail:
- there’s a big step in price between “a railway line built to millimetre precision” and “a completely new type of infrastructure that may or may not need superconductors to work”
- there are way more manufacturers for components of high speed rail. For rolling stock there 4 in Europe alone, plus more in Japan, South Korea and China. As for signalling, it depends on the underlying tech. And if we follow the current European tech standard, that encompasses a standard… That is made by multiple manufacturers, and where their systems are operationally compatible.
- for one, high speed rail is still rail, so building at grade & laying them on the ground is trivial compared to maglev systems. While some maglev technologies must be built like a bit of a monorail, which must be built elevated everywhere. And if we step outside of high speed rail, and point to rail in general, the mere existence of level crossings and street running disproves the fact it can only be built grade-separate. Sure, level crossings for HSR are a reason for the planning engineer to get fired, but for rail in general, it can happen.
- this depends on what is already there. Most high speed trains use standard gauge, and those that don’t, use broad gauge, and for that, only the Russian Sapsan comes to mind. If your country has standard gauge track, you can use the existing railway lines into town, disproving your point. And as for signalling, you can fit a train with multiple train protection systems, and many places are instead working towards using high speed signalling for general use, since the tech that makes high speed trains go BRR is the same tech that allows regular trains to run closer together. Finally, electrically, many countries use the same power on the wires on their high speed network as their general network.
- I’ve seen footage of a set of switch points with a diverging speed of 160 km/h, and it needs 9 switch motors to work. Proper high speed switches need even more, last time I checked the adopted standard was diverging speeds of 220 km/h. However, these motors all work in parallel, so the difference in switching time is negligible compared to a more basic type for general use. And these points work by bending one rail a little bit out of the way, bending another rail into place, and for high speed, pushing the frog (image for clarity) to the other side. This all unlike maglev, where you need to invasively rearrange the whole track, the replacement of which is probably several metres away.
High speed rail has enough compatibilities with regular rail to make sense.
To append, some examples of high speed systems with multiple manufacturers.
🇪🇺🇬🇧: Eurostar has, for the Channel Tunnel, two types of train built by two manufacturers. The old type by Alstom, the new type by Siemens.
🇪🇸: Just AVE has three different builders. The S-101 by Alstom, the S-102 by Talgo and the S-103 by Siemens. The S-102 is also used by Avlo, while OuiGo used Euroduplex sets by Alstom, and Iryo uses ETR 1000 sets built by Hitachi Italy.
🇮🇹: The ETR 500 is built by a consortium of manufacturers, several of which have been absorbed by others. The ETR 1000 has been built by a chain of builders due to mergers n stuff. And the NTV units are built by Alstom.
🇯🇵: Pretty much every major manufacturer of rolling stock has built at least some Shinkansen units. You’ll find trains by Hitachi, Mitsubishi, Kawasaki and others all over the network.
🇨🇳: The first generations of CHSR trains were all imported designs, derived from others, both Shinkansen and European types. This allowed them to kickstart a domestic rolling stock industry for later generations of train.
🇨🇭: Once we lower our standards of speed a touch, SBB uses two types, one by Alstom built in Italy, one by Stadler built domestically. And trains from neighbouring networks ride into particular areas, each of which has their own builders.
Maybe the new Japanese maglev Chuo Shinkansen will help - they’ve already had Mitsubishi, Nippon Sharyo (JR) and Hitachi build test trains for them
deleted by creator
What is grade-separate
They can’t cross any other tracks/roads. I.e. everything else must go above/below it.
They’re super expensive. Few people are willing to pay the massive amount extra for the slight dectease in travel time. Investors also know that.
Look at HS2 in Britain and how people are against the cost for higher speed options, or California HSR. I’m all for it, it should absolutely be done, but getting taxpayers to see 10 years into the future is difficult.
Brits are opposing HS2 simply because they are NIMBYies and oppose everything.
Not entirely accurate. There’s a lot of support for HS2 in the North as it would greatly improve the infrastructure - but it’s increasingly obvious that HS2 will only be built out as far as is politically beneficial for the government so the project will deliver high speed rail in the south then be abandoned due to massive costs.
South England will reap the benefits (again) paid for by the tax money of all.
I’m not sure that it is really paid “by all”. London brings in 25% of all UK taxes while having only 13% of the population. Londoners are paying twice as much as everyone else and yet everyone else complains about “South England/London reaping the benefits”. Maybe try to fund something without our help for once? Or at least say thanks.
You’re welcome for all the commuters that need to be able to get in to London via our abysmal infrastructure to maintain its prominent position.
That’s because HS2 is a totally flawed, Ill thought out, over budget and badly managed boondoggle - just like everything in the UK rail system since the Beeching cuts in the 60’s. If it was properly run, well thought out - and actually made a significant difference in time (not approximately 15 minutes from Piccadilly to Euston), we’d support it.
I agree with all of that, but the thing is that faster journey times shouldn’t be the main selling point of HS2 in the first place; it’ll relieve capacity of the groaningly overused West Coast Mainline, allowing more freight and cheaper short journeys.
If it’s properly managed.
Which it won’t be.
Plane maglev tracks are way more expensive than wheeled train tracks. It’s slower to get expensive when the terrain stops being plane, but it takes a lot of roughness for it to become cheaper. Most countries just do without trains crossing rough terrain.
And the largest cost of almost any train is the tracks.
What is a Maglev train? (From WIki)
Maglev (derived from magnetic levitation) is a system of train transportation that uses two sets of electromagnets: one set to repel and push the train up off the track, and another set to move the elevated train ahead, taking advantage of the lack of friction. Such trains rise approximately 10 centimetres (4 in) off the track. There are both high-speed, intercity maglev systems (over 400 kilometres per hour or 250 miles per hour), and low-speed, urban maglev systems (80–200 kilometres per hour or 50–124 miles per hour) under development and being built.
Why so little?
Despite over a century of research and development, there are only six operational maglev trains today — three in China, two in South Korea, and one in Japan. Maglev can be hard to economically justify for certain locations, however it has notable benefits over conventional railway systems, which includes lower operating and maintenance costs (with zero rolling friction its parts do not wear out quickly and hence less need to replace parts often), significantly lower odds of derailment (due to its design), an extremely quiet and smooth ride for passengers, little to no air pollution, and the railcars can be built wider and make it more comfortable and spacious for passengers.
Cute link to the Wikipedia Page
I am a curious human, beep boop
Where existing transit infrastructure exists, cities prefer upgrading existing infrastructure, rather than installing new infrastructure in its place, and where transit does not exist cities prefer not to install anything at all and favor cars typically. Maglev trains are extremely expensive to install the infrastructure, so gathering the money out of local budgets to invest in the extremely expensive maglev infrastructure is typically very difficult.
In the US in particular, politicians, just don’t look at the picture in the long term, and only focus on short term investigator as it pertains to their election schedule, and that is sad and has long-term impact on the local population.
Think about it this way, OP: You know when they’re working on the train network, how much you loathe commuting while a single line is out? How much of a pain replacement bus transportation is?
Now imagine having to do this for all train lines, everywhere, and you always have to switch trains (due to the difference in track) in between the blocks of replaced track. Plus you can’t neatly fit maglev where conventional track fits and vice versa, plus you need the power infrastructure, plus you need to find a way to buy the rolling stock without already selling the old one.
Also for the US the automotive and oil industries have powerful lobbies and an obvious interest in preventing the proliferation of electric-powered public transport. They’ve spent decades centering personal automobiles as the default method of travel and attack these projects with enthusiasm.
I read it’s the zoning and maintenance of the tracks. Since they probably have to be very precisely laid in order to support such a fast train.
That said I do wish for maglev trains to be accessible to all. I’d love to go across the states in a few hours on a train.
Plus, any maglev project has to be a new build and not outright replace existing lines. Replacing a line would require closing and removing the existing line, extensive reconstruction of the track bed, and probably delays or closure to tracks sharing the line. It’s not an easy thing for the government to justify when it would be cheaper and easier to simply improve the existing rail infrastructure. Or…you know…ignore the problem which is what they seem to be doing anyways
You still need rubber wheels when it’s stopped and at low speed. They retract when it’s fast enough for the maglev to take over.
The electrical conductors are expensive as shit. The ones in the train need to be super cooled or something. The track ones need to be built along the entire length. On three sides, one vertically and two horizontally. Along with massive power lines along the whole length. They don’t need to move to be expensive.
The right of way needs to be very straight. So compared to normal high speed, you have to spend much more on buying land, earth moving, tunneling, etc.
All this needs to be maintained to an extremely high degree because you can’t accept a failure. The engine on a high speed rail fails and you just slow down, no biggie. HSR track is fairly robust and can easily be inspected visually. Since it has the same base as normal passenger and freight you have an entire industry knowledge and inspection machines. Any part of maglev fails and you have a catastrophic failure.
The ones in the train need to be super cooled or something
maglevs arent using fuckin superconducters to levitate, it’s basic magnetic repulsion. Get whatever fictional version you’ve got in your head cleared up.
They absolutely can, the one currently being built in Japan does: http://www.ejrcf.or.jp/jrtr/jrtr68/pdf/14-25.pdf page 19-20
Here’s the one I was thinking of, superconducting magnets for the japanese one SCMaglev https://youtu.be/XjwF-STGtfE?si=jrnttpIrmHBXMtUF
Both of you guys are correct, because there are two types of maglev trains; the Japanese tech (Shinkansen) and the German design (trans rapid).
I didn’t even know Germany designed maglev train tech, usually when these trains are mentioned it’s related to Japan or China. Interesting
The Germans built a maglev test track over 20 years ago
In case you wanna read more about how it failed: https://en.wikipedia.org/wiki/Lathen_train_collision
The Chinese maglev IS the German Transrapid. The Chinese don’t have the mental horsepower too design this kind of stuff
Bit savage but your phrasing just cracked me properly up in public
One other thing I’ve not seen mentioned yet is capacity. Switching a maglev track is difficult and very slow, which reduces the number of trains you can get through a switch and therefore the number of people your system can carry.
Part of it, at least in California, is certain billionaire grifters derailing the effort to get high speed rail going at all and sucking up that subsidy money to do silly shit like LED-lit car tunnels.
https://www.reddit.com/r/fuckcars/comments/xhx6da/elon_musk_announced_hyperloop_to_kill_californias/
I remembered seeing a video by Real Engineering that explained a lot on Maglev and it’s pros and cons but one of the summaries that really hit it off for me and if I remember correctly is that it cost 11 times more to build per kilometre compared to conventional high speed rail, for about 70% more top speed while using 30% more energy.
https://www.youtube.com/watch?v=S4L_0CDsd1I
Personally I feel unless they come up with better superconductors, there’s still a long way to go before it really takes off.
Here is an alternative Piped link(s): https://piped.video/watch?v=S4L_0CDsd1I
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
We don’t have yet room temperature Supra conductors, it’s also why there was so much buzz about LK 99 this summer
Technically… We actually do, but not simultaneously room temperature AND room pressure. There’s one known material known to be superconducting at absolutely insane levels of pressure. That’s not sustainable for any reasonable usecase of superconductors.
https://www.sciencenews.org/article/superconductor-room-temperature-pressure-physics-electricity
What happened with that by the way? I’m assuming since I haven’t seen huge headlines since, it’s not been replicated or it’s been proven to be a hoax
Not replicated, they found some anomalies in the samples skewing the results
https://futurism.com/room-temp-superconductor-fails-work-replicated
Thanks for the summary and the links!
It was basically proven not to be a super conductor
As others here have already mentioned the infrastructure costs alone are a huge problem, where I live we are currently just trying to electrify the corridor and it’s not even the entire system, once again the overall rail infrastructure is already there (it’s just electrification) yet this is still going to take a minimum of a decade and the minimum cost is going to be more than $11bn, technically this saves money as you don’t need to buy a new fleet of rolling stock just upgrade the old ones.
So ya for a maglev you would need a completely different infrastructure and the rolling stock
