• 9488fcea02a9@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    ·
    7 months ago

    QNAP is taiwanese and still providing software patches for my 8 year old NAS. I think they are reasonably trustworthy

    But i agree with you, i’m going to build my own NAS from scratch this year…

    • Molecular0079@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      arrow-down
      1
      ·
      7 months ago

      I have zero trust in QNAP. QNAP knowingly sold several NASes with a known clock-drift defect in their Intel J1900 CPUs and then refused to provide any support. A bunch of community members had to figure out how to solder a resistor to temporarily revive their bricked NASes in order to retrieve their data. https://forum.qnap.com/viewtopic.php?t=135089

      I had a TS-453 Pro and my friend had a TS-451. Both mine and his exhibited this issue and refused to boot. After this debacle and the extreme apathy from their support, I vowed to never buy a pre-built NAS.

      • resetbypeer@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        1
        ·
        7 months ago

        Not to mention the sheer amount of security vulnerabilities they constantly have in their products. I never recommend QNAP for that reason. Out of the box solutions I only recommend Synology. Selfbuild route is uraid and my personal fav. Truenas scale.

        • nexusband@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          7 months ago

          Get an x86 Qnap and put Truenas Scale on it - there is no case in that form factor in existence.

        • nexusband@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          7 months ago

          Get an x86 Qnap and put Truenas Scale on it - there is no case in that form factor in existence.

        • Molecular0079@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          7 months ago

          Man, I have GOT to try Truenas Scale one of these days. I see it recommended so often, but I was just too used to a standard Linux ecosystem to bother learning something new. I am assuming it gets you closer to the feel of a pre-built NAS during administration tasks compared to Cockpit and a SSH session lmao.

          I think I am just always afraid of being locked into a specific way of doing things by a vendor. I feel like I would get annoyed if something that I could do easily on standard Linux was harder to do on Truenas Scale.

          • resetbypeer@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 months ago

            For sure. It’s basically a NAS software appliance. You just need to bring your own x86 hardware. Truenas core was good, but they will stop actively developing soon in favor for scale.

            I have it running both hardware (backup) as well as virtualized (with a special sas/sata card as PCI pass thru). Works like a charm.

      • nexusband@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        Do it anyway and put an x86 OS on one of the “standard UEFI” versions. There’s no other Hardware better on the market for this - even self build isn’t going to come close, there’s simply no case with 8 hotswap slots (for example).