I am worried that there is not really a benefit of doing that, just more noise and energy consumption.

  • Treczoks@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    10
    ·
    8 months ago

    That’s what MAC whitelists are for. Your DHCP server should be able to handle this.

    Identify your friendly devices and give them one setting with everything (full subnet and correct default GW). Identfy your IoT devices, and give them another (full, or specially limited subnet mask, and fake default GW, maybe a different nameserver, too). Anything else is guest and gets a very limited subnet mask and a working default GW.

    • BritishJ@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      8 months ago

      This is not the way to do it. The correct way would be multiple SSID’s with each tagged to their own VLAN.

      Each VLAN has its own subnet. You can then use a zone based firewall, to allow the zones(subnets) to access each other.

      You can also then apply QOS, to limit guest network speeds, prioritize LAN traffic etc.

      And zone based firewalls are stateful, you can do rules such as LAN can reach IOT, but not the other way. Or IOT can only reach the IOT server, on specific ports.

      • Treczoks@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        4
        ·
        8 months ago

        I know that this would be the most secure way. But I seriously doubt that this level is necessary in a normal home network.

        • Ajen@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          4
          ·
          8 months ago

          “Necessary” is a little ambiguous. You could argue that wifi is unnecessary for a normal home network.

          • Treczoks@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            1
            ·
            8 months ago

            Well, I think it is necessary if you have mobile devices. Anything nailed down should be connected by wire, but if it is mobile, it should get the connection. Especially if the cell phone link is not that good inside the house.

            • Ajen@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              1
              ·
              8 months ago

              None of my mobile devices are “necessary,” though. Honestly, I could live just fine without an internet connection. Not that I’d enjoy it, but that’s not necessary.

        • BritishJ@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          8 months ago

          My solution is the correct way and easier way. You don’t need MAC address white-list. You just have a guest SSID with DHCP on, they get the IP from the subnet in that zone. No crazy subnet hacks etc.

          Can I join your guest network, sure. Let me just grab your mac address, login to the DHCP server, create a reservation with a limited subnet mask that can still see the default gateway.

          Or can I connect to you guest network, sure here is the code or scan that QR code. That’s it, they’re in the guest VLAN and subnet, zoned off on the firewall and have QOS applied to not saturate the network.

    • Fal@yiffit.net
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      1
      ·
      8 months ago

      For anyone reading this, please don’t follow this advice. It’s terrible and basically security through obscurity