This issue is already quite widely publicized and quite frankly “we’re handling it and removing this” is a much more harmful response than I would hope to see. Especially as the admins of that instance have not yet upgraded the frontend version to apply the urgent fix.

It’s not like this was a confidential bug fix, this is a zero day being actively exploited. Please be more cooperative and open regarding these issues in your own administration if you’re hosting an instance. 🙏

  • TragicNotCute@lemmy.world
    link
    fedilink
    English
    arrow-up
    145
    arrow-down
    29
    ·
    1 year ago

    IMO it’s not a good idea to be discussing attack vectors publicly when a number of other instances are unpatched and the exploit has been in the wild for less than a day.

    I agree that admins need to work together, but discussing it in public on Lemmy so soon after the attack isn’t the way. There exists a Matrix channel for admins, that’s where this type of thing should go.

    • entropicshart@lemmy.world
      link
      fedilink
      English
      arrow-up
      121
      arrow-down
      8
      ·
      edit-2
      1 year ago

      When a vulnerability at this level happens and a patch is created, visibility is exactly what you need.

      It is the reason CVE sites exist and why so many organizations have their own (e.g. Atlassian, SalesForce/Tableau )

      It is also why those CVE will be on the front page of sites like https://news.ycombinator.com to ensure folks are aware and taking precautions.

      Organizations that do not report or highlight such critical vulnerabilities are only hurting their users.

      • TragicNotCute@lemmy.world
        link
        fedilink
        English
        arrow-up
        68
        arrow-down
        13
        ·
        1 year ago

        It is common practice to notify affected parties privately and then give full details to the public after the threat is largely neutralized. Expecting public disclosure with technical details on how to perform the attack in less than 24 hours goes against established industry norms.

          • I strongly disagree with some of your points.

            Yes, the vulnerability is out there. Maybe the root cause actually introduced a LOT of vulnerabilities. The fix is being pushed at a frantic pace. To expect the devs to take time out of the mad rush to notify those impacted to do a proper writeup is just insanity.

            It’s not insanity. It’s called incident management and it’s something the development team needs to build a proper procedure around, given the expanded scope of this project. I agree that the devs working on identifying, mitigating, and fixing the vulnerability should not be expected to also handle the communication. They need to designate someone for that role.

            A 0-day was actively being exploited in the wild. There was confusion, misinformation, and a general lack of information.

            You need to:

            • Indicate that you are aware of an ongoing problem and are working to identify it. This let’s people know there is an issue and that you’re aware of it. You can do this without giving specific details on how to replicate the exploit. This includes server admins publicly acknowledging that they are aware of the issue and will provide updates when they have them, to alleviate the concerns of their user base.
            • Once a mitigation are known, you publish that, in as many channels as you need to get that information out to the people who need it. So that server admins are aware of what they need to do to reduce their risk.
            • Once a fix is in place, you publish that, same as above.

            The way I see it? This (hopefully) got fixed pretty much instantly and there is active work to get the fix applied by the people who need to apply it. That is what should be done.

            And how do you know this since it’s not been communicated? Most of the information I (as a person running a lemmy server) have been able to glean is from random threads spread across random communities.

            Give it a week or two to see how they handle the public disclosure side of things.

            A couple of weeks for a postmortem. Sure. A couple of weeks for an active, in the wild, 0-day, to officially communicate that the problem exists and how to mitigate/patch it. Absolutely not. I still don’t see a security alert on the GitHub telling me I should be updating to <insert version> to patch an active exploit and it’s been how many hours now?

              • Is the project small? Yes.

                Did it explode in popularity leaving the devs overwhelmed? Certainly.

                Do I expect them to strictly follow established ITIL incident management? No.

                Do I expect them to communicate in a consistent way when an incident happens? Yes.

                I agree the primary developers should be left to fixing the problems but there are enough active members of that project that someone could have handled communication in a more concise and official way. I don’t consider random posts in asklemmy or selfhosting by random users just guessing to be a substitute for that.

                If the project is going to persist and grow it needs to get better at that. Pointing it out isn’t shitposting.

          • Goodie@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            1
            ·
            1 year ago

            Your typical dev is not a technical writer, and shouldn’t be doing the proper write-up.

            If you feel (and it seems you do) that this skill is missing from the Lemmy team, perhaps you should volunteer some time.

    • andrew@lemmy.stuart.funOP
      link
      fedilink
      English
      arrow-up
      72
      arrow-down
      2
      ·
      edit-2
      1 year ago

      If this was not a zero day being actively exploited then you would be 100% correct. As it is currently being exploited and a fix is available, visibility is significantly more important than anything else or else the long tail of upgrades is going to be a lot longer.

      Keep in mind a list of federated instances and their version is available at the bottom of every lemmy instance (at /instances), so this is a really easy chain to follow and try to exploit.

      The discovery was largely discussed in the lemmy-dev Matrix channel, fixes published on github, and also discussed on a dozen alternate lemmy servers. This is not an issue you can really keep quiet any longer, so ideally now you move along to the shout it from the mountaintop stage.

      • hawkwind@lemmy.management
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        FYI for anyone looking to deface more instances, That list is only updated every 24 hours. Depending on when it last run on your home instance, the info could be out of date.

    • xantoxis@lemmy.one
      link
      fedilink
      English
      arrow-up
      14
      arrow-down
      2
      ·
      1 year ago

      OK, as long as all the well-meaning people stop discussing it, nobody will ever find out about it.

      Son, this is not it.

    • tko@tkohhh.social
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Where is this Matrix Channel? Is it private? How can I get access as an instance admin?

    • Meow.tar.gz@lemmy.goblackcat.com
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      2
      ·
      1 year ago

      This is my take on it. I am running Lemmy in a docker using the dessalines image. I hope that there will be an update come this afternoon.

      • andrew@lemmy.stuart.funOP
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        There’s already an update available, but it’s for lemmy-ui not lemmy. Just update the tag to 0.18.2-rc.1 and you’ll have this fix.

        • roboadmin@lemmy.robotra.sh
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          1
          ·
          1 year ago

          This is probably a dumb question but I used the Ansible install for Lemmy and just did a git pull and --become again but UI wasn’t updated so I assume 0.18.2 isn’t in release yet (which is fine) but is there documentation on updating UI? I see where it’s showing in the docker-compose.yml file but I am uncertain what to do after changing it there (or if that’s the right place to change it).

        • Meow.tar.gz@lemmy.goblackcat.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Yep, that’s the plan! Thanks for letting me know. Lemmy is awesome and I am having so much fun with it. I expect it only to get better as the days and weeks progress.

        • robotrash@lemmy.robotra.sh
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          This is probably a dumb question but I used the Ansible install for Lemmy and just did a git pull and --become again but UI wasn’t updated so I assume 0.18.2 isn’t in release yet (which is fine) but is there documentation on updating UI? I see where it’s showing in the docker-compose.yml file but I am uncertain what to do after changing it there (or if that’s the right place to change it).

        • Meow.tar.gz@lemmy.goblackcat.com
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          I will have to wait until I can get home from work. Work does deep packet inspection and blocks SSH. I’ve tried doing SSH on port 993, one I know for a fact is open because I get my email that way on my phone and I still get a connection refused. Bunch of fascists!

        • robotrash@lemmy.robotra.sh
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          This is probably a dumb question but I used the Ansible install for Lemmy and just did a git pull and --become again but UI wasn’t updated so I assume 0.18.2 isn’t in release yet (which is fine) but is there documentation on updating UI? I see where it’s showing in the docker-compose.yml file but I am uncertain what to do after changing it there (or if that’s the right place to change it).

  • popemichael@lemmy.world
    link
    fedilink
    English
    arrow-up
    33
    ·
    1 year ago

    It’s strange that they would try to bury this information.

    The number 1 tool against future hacks like this is education.

  • Guy Fleegman@startrek.website
    link
    fedilink
    English
    arrow-up
    20
    ·
    edit-2
    1 year ago

    This issue is already quite widely publicized and quite frankly “we’re handling it and removing this” is a much more harmful response than I would hope to see.

    Hi, mod of a community on the instance in question here. Why is this response harmful? What should we have done instead?

    • andrew@lemmy.stuart.funOP
      link
      fedilink
      English
      arrow-up
      28
      arrow-down
      1
      ·
      1 year ago

      I feel like it’s up for discussion here and you very well may stand by the response there, but IMO with how prevalent this issue is, a specific response of “we’ve disabled custom emoji” or “we’re upgrading to 0.18.2-rc.1 today” would have been more constructive and reassuring to users. Removal of the question and lack of details gives me a lot less confidence that the issue and fix are understood and doesn’t leave any room for that discussion.

      • Guy Fleegman@startrek.website
        link
        fedilink
        English
        arrow-up
        13
        ·
        1 year ago

        Ahh, ok. That’s helpful, thanks!

        This is going to seem silly in the context of such a severe exploit but one quirk about our instance is that we literally do not have a “general discussion” /c/. The biggest one is scoped to Star Trek and so a Lemmy exploit is obviously outside the scope of … Star Trek. I would wager that’s the main reason the mod removed the post, but I will admit that just pointing this out, I feel like the forum mod from the short story Wikihistory.

        I’m in contact with the admins who manage the hosting, they are coordinating an update 0.18.2-rc1 as we speak. Also, there’s already been some discussion about setting up a general discussion /c/ on our instance and so I’ll include instance security in the scope of that /c/.

        You mentioned elsewhere in this thread there is a Lemmy admins Matrix room. Is my instance big enough for my admins to be invited? If yes, who can I point them at to get in?

        • andrew@lemmy.stuart.funOP
          link
          fedilink
          English
          arrow-up
          10
          ·
          1 year ago

          That’s definitely good to hear! Timely upgrades for the bigger communities will be important.

          Afaik the Lemmy Matrix rooms are all public. I wasn’t invited myself; just found them via Matrix search and jumped in.

  • exu@feditown.com
    link
    fedilink
    English
    arrow-up
    14
    ·
    1 year ago

    From what I found digging through some posts, this exploit only works if your instance uses custom emoji. Federated custom emoji are apparently harmless.

    • andrew@lemmy.stuart.funOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      Yes, if you have no custom emoji on your instance, you should not be vulnerable. A valid workaround before the fix is also to just remove all custom emoji, from what I’ve also read.

  • Netto Hikari@social.fossware.space
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    I’m not sure what to think about that instance. I saw some weird stuff in the mod protocol recently, if I remember correctly… Like some drama going on, etc.

    • Guy Fleegman@startrek.website
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      That’s disheartening to hear. Can you share any more detail? If we’ve got a mod causing drama somewhere I can take it up with our admins.

      • Netto Hikari@social.fossware.space
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        Oh, it was just a couple days ago and I’m not 100% sure if it was that instance. I faintly remember something about a hated episode or entire series? I’m not sure. I’m not a trekkie. I just remember that it gave off powermod vibes to me and I saw that a couple times. Didn’t spend any more attention to that, though, because I live by the standard live and let live. As long as nobody on my instance reports anything, I’m not going to act in most cases.

        • Guy Fleegman@startrek.website
          link
          fedilink
          English
          arrow-up
          6
          ·
          1 year ago

          I’m guessing it was a different instance because we don’t have any powermods. (I actually didn’t realize Lemmy already has powermods, sheesh!) Most of us just mod one community on our instance and I don’t think any of us are modding on other instances.

          Regardless, I’ll keep an eye out for anything fishy.

      • fox@lemmy.fakecake.org
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        thanks, I guess I missed it. gonna update ASAP just in case, even though I’m the only user of my instance.

    • demesisx@programming.dev
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      24
      ·
      1 year ago

      Which leads me to ask: why are we still using Docker images as a MAJOR part of our infrastructure when superior alternatives exist? The Docker aspect made me realize how hacked together the codebase actually is.

      • Zetaphor@zemmy.cc
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        Just because it’s not using your personal preference of containerization doesn’t qualify it as being “hacked together”. Docker is a perfectly acceptable solution for what Lemmy is.

      • MigratingtoLemmy@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        arrow-down
        1
        ·
        1 year ago

        I will always espouse containers for critical workloads as they provide much better orchestration, especially during deployment. If your complaint is specifically against docker, I agree, we should be using k8s

          • andrew@lemmy.stuart.funOP
            link
            fedilink
            English
            arrow-up
            13
            arrow-down
            1
            ·
            1 year ago

            When someone says docker in the context of images today, they’re already talking about the OCI format.

          • The Quuuuuill@slrpnk.net
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            2
            ·
            1 year ago

            OCI uses Dockerfiles and runs Docker images as docker images are just KVM image, which is what OCI runs. Nix is absolute overkill for the orchestration of a web server workload and would be better for managing the container host (whatever you’re running kubernetes or docker swarm on).

            I don’t really know how to put this, but nearly every single web service you encounter and interact with is built using a dockerfile just like how Lemmy is doing. If you’re going to disqualify Lemmy as a viable platform based on it having a dockerfile, I got bad news

            • towerful@programming.dev
              link
              fedilink
              English
              arrow-up
              2
              arrow-down
              1
              ·
              1 year ago

              I thought KVM was virtualisation, as in separate kernels.
              And I thought containers shared the hosts kernel. Essentially an “overlay os”.

              So, a KVM could virtualise different hardware and CPU architectures.
              Whereas a container can only use what the host has