Change your thermal paste. These machines (as do all modern machines) run hot, and their paste doesn’t last long if you’re a heavy user. Find a thermal paste that’s thick in particular.
The pump out effect is really drastic on these modern CPUs if you’re constantly hitting 100% load.
The only thing I’m really curious about is how far back the CPU gets throttled with the dGPU active and busy.
On both of my machines when I render a video using my GPU the CPU is still the limiting factor because of the codec I chose. On my 11th gen machine it took like 5 minutes before it was power throttled down to 25 watts. My gen 6 takes longer to power throttle and only goes down to 35 watts, but either power level that sucks. I already know the gen 7 dials back the clock speeds, but I’m mostly curious how far it goes and how quickly?
The easiest way to test this is just open a video game that’s taxing on the CPU and GPU, I don’t think the CPU throttles with light loads like if you opened furmark. Maybe benchmarking software would cause it to throttle.
Let me know how the thermals are on that machine. I ended up paying out the ass for a refurbished gen 6 because it comes with the 4090 and a MUCH bigger heatsink. From what I saw initially in the reviews the performance is worse not just because the 100 series has worse IPC, but the machine doesn’t actually boost as much since it’s more thermally limited.
HOWEVER the machine gets a LOT better battery.
My gen 4 would get anywhere between 30 minutes and 2 hours of battery life unless I’m doing literally nothing on it. This gen 6 gets like 4 hours unless I’m heavily taxing it. But from people online I saw them say 7 hours is easily doable. And having a GPU that doesn’t use 20 watts sitting idle sure helps.
Which series? T/P or one of the economy options? The T, X, W, and later on P series have been the only models people really like.
We have a few T series at work and they’re not bad. My T14 Gen. 1 doesn’t thermal throttle at all as long as its thermal paste isn’t toast. It will run at basically its full all core boost speeds all day long. The newer 12th Gen. machines dial their clocks back a smidge under full load, but that’s because they have 2x the cores of my measly 10th Gen. machine.
Also I have a T14s AMD and that thing is a BEAST for such a small machine. 35 watts out of an AMD 6 core is no slouch for something that small. And I easily get 7+ hours of battery life out of my abusive use.
They didn’t. They did kinda change the goalpost though.
Which model did you get? The i7 or the i9? The i7 models have a minimum guaranteed TDP of 28 watts, while the i9 is at least 35. But 35 watts on such a high end CPU is dire. The Gen. 7 also killed their high end GPU options, but maybe that leaves more power headroom for the CPU.
That’s still better than my P1 Gen. 4 which throttles down to 25 watts. 25 watts on an 11th Gen. i9 is AWFUL performance.
Fully autonomous (no driver needed) or is level 3 self driving enough? (tesla straddles that line)
More than just the cellular radio.
https://www.theregister.com/2023/04/27/qualcomm_covert_operating_system_claim/
I think this was built into the SOC itself, or the GPS module, but it runs 100% independently of your OS, even on custom firmware.
I got into CloudWorkers with the hopes it is some sort of legit cause I am in deep crap.
https://www.reddit.com/r/freelance/comments/kfx8bt/warning_about_cloudworkers/
I wouldn’t hold your breath.
Also low level, $20 an hour, remote really is asking for a LOT. Can you not work in person, or do you just don’t want to work in person? $20 an hour is reasonable in person, $20 an hour remote isn’t.
Words will do nothing, that’s how Trump was elected.
Actions are what’s needed. Get out there.
If you’ve got a thunderbolt port on your laptop and a thunderbolt dock on your laptop then there’s no reason why it shouldn’t work.
I’m not familiar with thunderbolt on linux, but on windows you plug it in and it just works™️ and shows up as if it was inside your machine. Your DE on linux might automatically do it, but if you’re command line only you’ll probably have to run a command first.
Social media in general was also a lot smaller back then too.
Until the iPhone got popular you had to use a computer to access it. And back then we didn’t really trust sleep mode very much so you had to wait 2 minutes for windows to boot when you wanted to go on the net. VS right now I’m standing in from of my clothes not getting ready for work for 45 seconds.
That’s how most things are in tech. Why reinvent the wheel when someone’s already made it?
I personally love trying to break into any device running android and install our companies web crawler onto it. I almost got it working on my DJI drone remote. Sadly I don’t think I’ll be able to get into these Logitech Tap Scheduler things.
The worst laptop you can find could probably be better than even a reasonably specced VPS. Low end VPS are dire, and you can get some pretty decent laptops for almost nothing. If it’s pre 8th Gen. Intel they’re basically worthless on the used market. But they’ll still easily get the job done.
Decentrilization is both a blessing and a curse.
If there’s an issue you can make your own community with blackjack, and hookers.
But at the same time these communities never seem to get super big (minus a few) and if you’re subscribed to both there’s not a good way to deduplicate the posts. So 5 communities post the same thing (or one person posts them in 5) sometimes you see all 5 side by side.
Don’t forget safety. There’s a LOT of of sketchy ass gan (and non gan) chargers I wouldn’t even let in my house. Gan chargers being by so compact dont have enough space to safely insulate things.
Modern phone cameras are 99% software at this point. If you took one phones camera and put it onto another phone without adapting the software then the photos will look like ass.
You can’t just unplug something from device X and connect it to device Y. The connectors aren’t standardized. And even if they were they wouldn’t fit because the placement is different. In theory you could take the CPU off of one device and plant it onto another. But have fun with that BGA micro soldering. Plus the connections will be different unless you picked a phone with the exact same CPU. Ram is the only thing you could potentially upgrade. But like good luck.
You’d legitimately have an easier time making a new phone from scratch than trying to piece together 3 different phones.
If you need the money then start looking for jobs now, and quit when you’ve got something.
There’s probably a better way but…
Open the page, right click, inspect, paste these in there and possibly expand the node list for users.
Users
document.querySelectorAll('.person-listing')
Comunities:
document.querySelectorAll('.community-link')
I had 0 users, but 69 communities.
Are you on Windows or Linux? On windows 11 go to settings > power and battery > power mode and if you set it to high performance it almost doubles the TDP of the CPU. On windows 10 click the battery and drag the slider to high performance. If what I read online is correct the T14 and the T15 are the exact same heatsink and motherboard so unless the 1" gap from the end of the heatsink to the vent is that much of a problem they should perform exactly the same, just like the later T14 and T16 models. But 4 years is more than enough time for the thermal paste to be toast. My P1 ruined it’s paste in less than 6 months, but that’s also an i9.
But that’s the world of modern Intel CPUs. Turbo boost as far as you possibly can until you can’t turbo anymore. Then in 6 months when the thermal paste is ruined you’re searching for a new machine.