I am very happy with Kagi. Can recommend. In the end someone has to pay for the service. With Kagi I know I don’t pay with my data but with money.

IPv6 has temporary IPs for privacy reasons. NAT is NOT a firewall. Setting up a real firewall is more secure and gives you more control without things like UPNP and NAT-PMP.

I still have my IPv6 sage shirt somewhere.

You should rather find out why things break with IPv6. The best time to make IPv6 work is now.

Why should I use IP6 in my small home network?

• No NAT. Especially in a home network NAT can be a hassle.
• A bit more anonymity through changing temporary adresses.
• Some people don’t even have a real IPv4 address anymore in their home and only connect through CGNAT. That means that if you disable IPv6 on your computer you only use CGNAT.
• The fact that EVERYONE needs to transition to IPv6 or it doesn’t make sense.

Or in an SMB where there are less than 100 IP’s used on a daily basis?

• No NAT. NAT is no firewall. If you can’t set up a firewall you are honetly not qualified to be a network admin.
• Easier VPN S2S-VPN. I had a few instances where the internal IP ranges clashed.
• All the other advancements of IPv6
• The fact that EVERYONE needs to transition to IPv6 or it doesn’t make sense.

First I have to pay the cost of transition, along with the risk of things not working while I do this, and then the risk of something new being added and not working.

You can transition step by step. Dual Stack is a thing.

IP6 is good for backbone right now. It will slowly transition into LAN for larger environments (think Enterprise when they setup new network segments, since they’re buying new hardware anyway. But only after extensive testing.

That makes no sense to me. Every network in itself doesn’t need IPv6. The 10.0.0.0/8 range has 16 777 216 addresses. IPv6 only makes sense if everyone uses it. We bought ourselves time with NAT and CGNAT and splitting up older ranges but that won’t last forever and is costly.

Everyone needs to transition otherwise services will need to keep their IPv4 forever. And if the services keep their IPv4 users don’t have an incentive. Maybe we should transition BEFORE there is time pressure. Now is the time to slowly start setting everything up with enough time to plan and test firewall rules and appliances and everything else.

IPv6 after so many years still is a victim of the chicken-egg-problem. People don’t need it because services don’t support it because people don’t need it because … and so on and so forth. I try to enable IPv6 wherever I can and I didn’t have a propblem for ages. Dual stack is stable and there are actually a good amount of services that support it.

I think we should all push to implement IPv6 so that IPv4 can finally be laid to rest. Using IPv4 makes everything a bit more expensive because it is so damn expensive to get a stupid number. If someone is really scared that every computer has a publicly routable IP, and if you really think you can not configure a firewall, there is a private IPv6 space and you can use NAT with IPv6. It’s not recomended but it’s possible. I’d still say using a firewall is not harder and just as safe.

And there is the fact that you can make so many subnets which can make your internal network so much safer. You can controll better how packages are sent to groups because broadcast was dropped in favor of multicast. There is IPSec Support built in. Secure Neighbor Desicorvery to prevent attacks like ARP spoofing. There are a lot of reasons to implement IPv6 and even to switch to IPv6 only if possible.

I think the idea of prusa is cool but I feel like they are a bit behind. Especially regarding price to performance. That is what I gathered from the reviews at least. They are pretty reliable but not the latest and greatest tech.

Yeah I did that math myself. I would only do that because I like my Ender 3. But in the end a complete package sounds very tempting.

Don’t misunderstand me. I am very impressed by the performance of the Bambu printers. They really gave the established brands a kick in the butt price and performance wise.

Still it makes me uneasy to have a closed source system. I don’t mind butting some effort into my printer if it is more open. I mean my ender 3 is a lot of work. I’d assume it gets better than that.

I don’t have the space for two printers. But I think too that at some point upgrading makes sense. The Ender 3 is nice to tinker but I want something that just works.

If I’m not mistaken you can save keys in these chips so that they can not be extracted. You can only use the key to encrypt/decrypt/sign/verify by asking the chip to do these operations with your key.

In my opinion NAT is a hack that makes lot of things harder than they should be. STUN and TURN are services that are created because there is no easy way to connect two hosts between different NATs. UPnP for port forwarding is another. CG-NAT is even worse. I have heard of so many people having problems with it.

Breadcast is messy. It is like screaming into a room and waiting for an answer. Multicast lets the computer decide if it wants and needs to listen to a specific group message.

IPv4 didn’t have cidr from the beginning. They only had classes. IPv6 was designed with complex routing and sub routing in mind.

They never wanted to worry about address space size again. And this makes subnetting much easier. I have a /56 allocation so I could do 256 /64 subnets. I hope that at some point home routers will have the option for seperate subnets built in. This way you could easily have guest, IoT, work or whatever networks without NAT.

One thing you have to consider though is that the minimum network size that allows autoconf is /64 and that because of the privacy extension a device usually has 3-4 IPv6 adresses.

IPv6 changed some things. First and foremost it has a huge address space:

• IPv4: 4294967296 (2^32)
• IPv6: 340282366920938463463374607431768211456 (2^128)

Then they simplyfied some things:

• Removed Broadcast in favor of Multicast and Anycast
• Added autoconfiguration without a DHCP server
• Better subnetting support

And much more

IPv6 traffic is globally steady at around 37%. So it isn’t a majority by far.

The perpetual chicken egg problem of IPv6: many users don’t have IPv6 because it’s not worth it because everything is reachable via IPv4 anyways because IPv6 only service don’t make sense because they will only reach a subset of users because many users don’t have IPv6…

OMG Boobs! Does nobody think of the Children?!?!?!?!

Pathetic

Depending on your jurisdiction it is probably your responsibility to enforce your copyright. I can always just record your music off a streaming platform. You can attach a license to your song in funkwhale (see this). If you want DRM for your music then funkwhale is probably also not for your. You still have to enforce your self that nobody monetizes your works if you don’t allow it. You can delete things from the fediverse if you know the source but I don’t think funkwhale allows DRM protected music.

If you attach a license to your works that doesn’t allow monetization and they monetize the app you can sue them. I doubt they will though. And they probably wouldn’t be very successful because the app and the server are open source. You could just build the app without monetization. And someone probably would.

The upload and sharing copyrighted music probably falls into the hands of the instance admin. As with PeerTube it is probably not a good idea to have open signups. But everyone has to make sure that doesn’t happen.

The fediverse is an open and very liberal space. If you want full control over your works it is probably not for you. No software with federation probably is. If you want and need to control over your works (which is legitimate) you need something with a tighter grip, maybe host the things yourself on your server with DRM. That doesn’t mean it is bad for everyone.

I am unsure if I understand you correctly. Funkwhale is for you to publish music or other audio you make yourself. Not for your commercial music library. And the software itself is under the GNU AGPLv3. You can host the software yourself on your own server or you join an instance of someone else. Just like lemmy, mastodon or all the other fediverse projects.

What are you saying? This is an open source project that is connected to the fediverse. It aims to be something comparable to soundcloud where people can share their music. What about this is says monetization?