Yuzu looks awesome. Thanks a lot <3

I’ve created a new layout for windows and fedora directly. I don’t know if it’s qmk/via compatible

Thanks a lot, at 9$ a key it’s expensive but it may satisfy my OCD 👍

Start to spread into your friends/parents/kids place and send them virtual files to print :p

Two printers will always beat one printer. Upgrading your ender 3 will be a money pit if you want something that does same as last generations printers.

An designed enclosed printer will let you use ABS that is to my mind one of the best plastics I use.

I don’t know for Creality K1/K2 though.

Would probably do this, but also rip it in very poor quality to be sure it does not take too much space :D

Something like Notion or Coda would not fit the bill? You need to do some work to fit your usage (configuring tables/views)

Totally agree with you 👍

Yeah, but it’s the storage capacity that is interesting. If you don’t need a lot of storage, go to the NVME/SSD option for sure. If you need more, price/capacity is still on the HDD side.

Just found this N100 as NAS looks good.

IPC N100 The same on Aliexpress

My I5 is around 25$ by year, so it would need to run for 10 years to break even with the cost of the motherboard alone.

But that’s incredible what they were able to do for low energy/compute.

A) I’ve seen a lot of people recommending NUC100 computers, but the sata ports may be limited. I currently have my old computer doing the thing (an i5 6500) with Unraid OS, really happy with it BUT they are changing their paying model this week so I don’t know I would have went this way. I don’t like subscription models.

B) Why not both? I have two SSD of 512Gb for items currently downloading and two HDD for Capacity (each 8Tb) already 30% filled in 1month. Both set of hard drives are set in duplication mode to avoid losing any day.

That’s a great answer too.

Hi there Paf,

You are totally right, lack of power (cpu) on a Marlin firmware. When using klipper, the board doesn’t do any processing anymore. It becomes dumb and transfert the input signals to the pi and output signals to the motors etc…

A board not powerful enough for anything can do evrything under klipper if compatible. (some cpu was not compatible last time I checked 2 years ago, it may have changed). The awesome thing with klipper is that it can be compatible with the original motherboard and you can add resonance compensation just by plugging a pi. But that’s not OP problem as he needs a new board.

For me, Klipper had been a great discovery and I can’t think to go back simply due to the easy way of changing the config files compared to recompiling everything in Marlin.

Hahahaha, sorry about that.

The board you chose will limit what you can do due to memory space limitations or raw power.

The original ender 5 board didn’t had enough memory to activate auto bed leveling without removing other things.

In this world we have 3 firmware usable I know of:

• Marlin: firmware of original ender5
• klipper: must run on a raspberry pi linked to a motherboard (or tweaks with cm4 and compatible boards)
• Duet3d (reprap) firmware.

The board you choose will limit the firmware you will use that will limit what you can do with it.

Take a look to what resonance compensation is by example. I’m not sure it’s available on Marlin due to lack of raw power of the boards.

But with kipper firmware offloaded to the pi, with a compatible board, you can unlock resonance compensation that gives a way better finish to your prints and easier config changes like Reprap (duet3d)

As you can see it’s a rabbit hole 😁

It depends what you want:

• You are fine with the current options you had with the creality board, maybe activate auto-bed levelling Go the SKR way as other have mentionned

• You want to get the most of your printer with Resonance Compensation (the next best thing for surface quality) Go check klipper I have it on all my machine. You’d need a board like @emilie mentions or a basic board + a full raspi (Zero 2 if no cam) Duet3D may be doing it too but I’m not knowledgeable on their solutions.

Firefox, something, Ireland?

• SuperSlicer
• klipper