I imagine all plastics will be out of the question. I’m wondering about what ways food packaging might become regulated to upcycling in the domestic or even commercial space. Assuming energy remains a $ scarce $ commodity I don’t imagine recycling glass will be super practical as a replacement. Do we move to more unpackaged goods and bring our own containers to fill at markets? Do we start running two way logistics chains where a more durable glass container is bought and returned to market? How do we achieve a lower energy state of normal in packaging goods?

  • BirdEnjoyer@kbin.social
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    7 months ago

    Well, in this hypothetical I’m proposing, there is no superheating involved- just printing, and being set to dry.

    Ceramics get completely rigid, but relatively fragile in this state, which would be sufficient for a single use material, but if they’re soaked for long enough, would dissolve.

    The term is “Bone Dry” and specifically how to reclaim bone dry clay- that’d probably give you an idea on how it breaks down/dissolves.

    there would be no straightforward way to get it back into print media unless there were recycling centers, but if one cleaned the food matter off well, in theory it could be standard clay people could use.

    Imagine collecting food cup clay and making it into bricks for public projects.

    • PainInTheAES@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      7 months ago

      As a former ceramic artist I would be very wary of this solution. Bone dry clay is way too fragile to survive transportation unless very carefully packed. Potentially an air dry paper clay could work but even then it isn’t very durable.

      As you mentioned in your comment, the minute bone dry clay touches liquid it starts to slake down. So you would end up with clay mush in your food and the structure would start to fall apart.

      Additionally, silica dust from bone dry clay is really bad for you. Probably not very likely to effect the occasional consumer but people interacting with it often would be at an elevated risk for lung issues.

      • BirdEnjoyer@kbin.social
        link
        fedilink
        arrow-up
        3
        ·
        7 months ago

        Interesting, I was under the impression that clay was inert when ingested.

        The transportation and dust would be lessened from the printing process if it were done by the individual, but if what you say is true, then the whole idea is worthless unless there’s an alternative material available.

        • PainInTheAES@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          7 months ago

          Most clay is likely safe to ingest. However the willingness of customers to ingest clay may vary and the quantity of clay may impart a flavor on the product.

          I’m also not sold on the printing process. Ceramic is strongest when the clay platelets are aligned and in a 3d printing process there are many layers. Each of the layers introduces a weak point that is likely to crack in drying or use. Ceramics already have quite efficient methods for production primarily slipcasting and extrusion. In these methods pieces are formed without “joins”.

          I’m also not convinced printing it at home would be feasible for mass production/adoption.

          That being said it is an interesting idea. I think you could probably make single use, unglazed, low-fire ware like Indian Bhar. Which could get recycled into aggregate. Firing adds emissions back into the process though and I’m not sure where that ranks compared to something with an existing supply chain like paper alternatives.

          • BirdEnjoyer@kbin.social
            link
            fedilink
            arrow-up
            2
            ·
            7 months ago

            I am talking about though is SLA printing though- resin printing, but without the resin, basically.
            Which is why I think its more feasible than just extrusion printing on principle. The layers are incredibly thin, with no extrusion involved, and no exposure to air until well after the layers are formed.

            • PainInTheAES@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              7 months ago

              Hmm, that’s interesting. I’d be curious in how that would be cured and how the layers would stick together. Plaster might be interesting too since it has a faster setting period than clay.