There are no arrows, no obvious pins, no pin latches. This band is different than all of the ones I’ve ever sized. Does anyone know how to remove links from this band?

Edit: user Septimaeus was correct in that it was a fixed link band. The link they provided helped in understanding what is requires to resize, and the band now fits my wrist like it was made for it. Thanks!!

  • bstix@feddit.dk
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    edit-2
    8 months ago

    Just move the pin to another pin hole?

    okay my image didn’t upload. In the second picture, the pin is the third hole from the top.

      • Treczoks@kbin.social
        link
        fedilink
        arrow-up
        1
        ·
        8 months ago

        There are tools with which you can drive out the pins. They are only good for straight bands, not the tapered ones (unless you don’t care for the looks).

      • bstix@feddit.dk
        link
        fedilink
        English
        arrow-up
        1
        ·
        8 months ago

        Ok, I am looking at a similar one right now, and it appears that it has been adjusted.

        One side is much shorter than the other and the short side seem to have been opened on the inside between the first and second link from the lock/narrow end. The first full “inside” clamp between two “outside” links has been opened and closed at some point.