From top to bottom:

  • Monsgeek M1 - Boba U4T switches with 67g springs - Gentleman XDA V2 Keycaps = This is the Daily
  • TM680 - MMD Holy Panda switches - Pudding Keycaps = This is for work
  • Tester68 - Gateron Milky Yellow Switches - Honey Milk keycaps = This is now my partners keyboard (Although its just been placed on her desk, we will have to see if its gets used)

All of these have been lubed, tape modded, the TM680 and Tester68 have wheel weights and case foam to make the keyboard heavier and feel less hollow.----

  • SuperLogica@lemmy.worldEnglish
    4·
    1 year ago

    Have you noticed your left and right arrow keys are the wrong way round on the Monsgeek? Flagging just in case you haven’t spotted it!

  • SuperLogica@lemmy.worldEnglish
    1·
    1 year ago

    I don’t have any black keyboards, and it wouldn’t really suit my desk (white IKEA!), but I am majorly eyeing up your pure black keyboard. Nice!

    (Also, I have a thing about keycaps that offset their characters. Can’t stand it. So black on black keycaps AND the characters are printed center and large? That’s my jam.)

    • Bloved Madman@lemmy.worldOPEnglish
      1·
      1 year ago

      I have a white idea desk (this photo was taken in the kitchen) and the white and black contrast goes well, but I also have a super large black desk mat which makes the contrast between the white table and black keeb less aggressive

  • NightOwl@lemmy.oneEnglish
    1·
    1 year ago

    I’ve never done the tape mod before. Do you enjoy it enough that it is something you wouldn’t go without anymore when it comes to your own keyboards? Might go and open up my keyboard to try it out.

    And those honey milk keycaps look nice.

    • Bloved Madman@lemmy.worldOPEnglish
      2·
      1 year ago

      Tbh, If I hadn’t done it and it meant that I had to open up the keyboard just to do that mod, I wouldn’t bother. If I was opening it up to add foam, or something else, or it was on first assembally of the board, then whilst its open, I would just do it, its a quick job (I cant quantify the difference it makes) and once its done, its done.

  • Varstar@lemm.eeEnglish
    1·
    1 year ago

    The Honey Milk keycaps are pretty neat

    Speaking from experience

    • Bloved Madman@lemmy.worldOPEnglish
      1·
      1 year ago

      They are different, however, only subtlety, down to the plastics they are made from, both hyper tactile with no pre travel. The MMD HPs were like 17GBP for 110 switches. so they are well worth picking up even just to try them out) I had to get 30 more bobas as i went from a 65% to a 75% and the 30 cost me 25GBP… and then I needed to get new springs as the new Bobas come in 65g and then I needed to replace all the springs as the old 68g springs are slightly different to the new 68g springs you can buy) in total I have spent about 80GBP on boba switches (around 90 switches)

      Cost wise, get the MMD HPs, but for quality, get the bobas.