yokonzo@lemmy.world to 3DPrinting@lemmy.worldEnglish · 2 years agoMy outer walls are printing fine, but my infills are super wispymessage-squaremessage-square19fedilinkarrow-up135arrow-down10file-text
arrow-up135arrow-down1message-squareMy outer walls are printing fine, but my infills are super wispyyokonzo@lemmy.world to 3DPrinting@lemmy.worldEnglish · 2 years agomessage-square19fedilinkfile-text
minus-squareroofuskit@lemmy.worldlinkfedilinkEnglisharrow-up2·2 years agoI only bring it up because the source of that problem and your infill issue may be related.
minus-squareyokonzo@lemmy.worldOPlinkfedilinkEnglisharrow-up1·2 years agoNo you have a point, i definitely need to see if I can improve that once I’m done with this project. I’m getting some slick upgraded parts soon which may help
minus-squareroofuskit@lemmy.worldlinkfedilinkEnglisharrow-up1·2 years agoHave you calibrated it well? Have you done the slicer setting calibrations?
I only bring it up because the source of that problem and your infill issue may be related.
No you have a point, i definitely need to see if I can improve that once I’m done with this project. I’m getting some slick upgraded parts soon which may help
Have you calibrated it well? Have you done the slicer setting calibrations?