I am building a NAS in RAID 1 (Mirror) mode. Should I buy 2 of the same drive from the same manufacturer? or does it not matter so much?

    • empireOfLove@lemmy.one
      link
      fedilink
      English
      arrow-up
      3
      ·
      11 months ago

      Yup. Same age, same design, same failures… and array rebuilds are super intense workloads that often force a lot of random reads and run the drive at 100% load for many hours.

    • teawrecks@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      2
      ·
      11 months ago

      I’ve heard just in general. The resilvering process is hard on all the remaining drives for an extended period of time.

      • Avid Amoeba@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        So you’re saying I should be running RAIDz2 instead of RAIDz1? You’re probably right. 😂

        • teawrecks@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 months ago

          I made that switch a few years ago for that reason.

          That said, as the saying goes, RAID is not a backup, it should never be the thing that stands between you having and losing all your data. RAID is effectively just one really dependable hard drive, but it’s still a single point of failure.

          • Avid Amoeba@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            11 months ago

            So you’re saying I should be running JBOD with backups instead of RAIDz1? You’re probably right. 🤭

            • teawrecks@sopuli.xyz
              link
              fedilink
              English
              arrow-up
              1
              ·
              11 months ago

              As long as you’re ok with it being way less dependable, and having to rebuild it from scratch more often 😉.